Usage: The剥皮机series for power plants, mining, steel mills, ports, and petrochemical SD is designed for securing and cleaning the adhesive layer on the leading edge of the conveyor belt during joint preparation. This operation can be used in various situations and locations. Product Advantages: 1. Large stripping area and fast speed, significantly reducing labor intensity and the time required for jointing; 2. Lightweight, easy to carry and transport; 3. Stable operation. Technical Parameters: 1. Motor Power: 0.75KW 2. Line Speed: 0.3m/s 3. Maximum Stripping Width: 200mm (NN, EP conveyor belts and steel wire rope conveyor belts) 400mm (standard belts) Usage Instructions: 1. Align the conveyor belt centrally using conventional methods, and cut the corresponding joint with a knife to separate the first layer; 2. Place the stripping machine in an appropriate position and secure it with钢丝绳; 3. Connect the power supply; 4. Clamp the separated first layer with a fixture, start the motor, and use the blade to cut the stripping section at an appropriate location; 5. After the first layer is stripped, repeat the above steps to strip the second, third layers, etc. Safety Precautions: 1. Power connection should be performed by a qualified electrician; 2. Secure the stripping machine during use to prevent sliding; 3. Do not exceed the specified width during stripping.