GGDY-2000 罐耐压试验机 罐式耐压测试机 ( Bottom of the can - Canning Lid Pressure Resistance and Can Body Burst Pressure Test )

GGDY-2000 Can Pressure Test Machine (Can bottom and lid pressure resistance, as well as can body puncture resistance testing)

During the 2-piece can manufacturing process, it is necessary to test the can bottom for pressure resistance and the can lid's pressure resistance after sealing. This machine can accurately obtain the can lid's pressure resistance performance and parameters, serving as an arbitration standard for measuring the pressure resistance of can lids and bottoms, and can avoid the influence of other factors (such as: uneven inner diameter sizes of the pressure ring inside the lid when measuring a single lid), and can be used to calibrate other can lid pressure resistance measurement devices.

GGDY-1000 can bottom and lid pressure test machine can detect can bottoms and lids of various sizes and heights.

Bottom of Can Measurement: Place an empty can sample into the device, secure it in the fixed clamp, apply pressure, and increase it to the set value. The rate of pressure increase can be set on the detection instrument. The sample deformation test ends, and the instrument displays the high test pressure value.

Cylinder Bottom Measurement: Seal the cylinder lid on two cans, cut off the bottom of the two cans, and place them in the instrument for measurement. Place the sample on a fixed clamp, apply pressure, and the pressure will rise to the set value; the rate of pressure rise can be set on the detection instrument. The deformation test of the sample is terminated, and the large pressure value is displayed on the screen.

This unit can detect 2-piece cans and 3-piece cans.

This testing machine boasts reliable performance, durability, high accuracy of test values, cost-effectiveness, ease of use, and more.

This testing machine is suitable for pressure resistance tests on can bottoms for products like pull tabs.

The machine is equipped with a can body burst pressure test function.

Technical Specifications:

Range: 0-0.9 Mpa (0-900 Kpa)

2, Tolerance: 2 KPa

3. Equipped with an "aerodynamic booster valve," which can increase the gas source pressure to 1 to 2 times the input pressure (optional)

4. Various safety features, with calibration port for easy calibration

Power Supply: 230V/50Hz

6) Gas Source: 0.5 Mpa - 0.7 Mpa

7) Dimensions: 550 x 380 x 600 (W x D x H) - Tablet chalk

8) Weight: 30 kg