Product Introduction

    DY-100S Simple Conversion Switch, primarily used for converting standard thermocouples, working thermocouples, and DC voltage signals (0-10V, 0-24V) during measurements. It allows manual transfer of any channel to the output, featuring a very low parasitic potential (less than 0.4 microvolts). Easy to operate, it is an essential device for metrological verification, calibration, and measurement systems.

【Main Application】

Used for on-site and laboratory verification, calibration, or testing of temperature, compatible with manual thermocouple verification system.

Description If the existing specifications and models do not meet your requirements, we can offer customized solutions for you.

Application

Any input channel can calibrate standard thermocouples and thermometers, enabling forward and reverse testing to eliminate testing errors.

Technical Specifications

Product Model: DY-100S

2. Scanning switch parasitic potential: ≤0.4μV

3. Allows up to 0.5A current

4. Specifications: 12-channel input, copper low-thermal potential terminal blocks

1-lane output, low thermal EMF copper terminal block

5. Dimensions: 255 mm (Length) × 185 mm (Width) × 95 mm (Height)

6. Weight: < 1.5 kg

7. Work Environment: Temperature: (23±2)°C, Humidity: ≤80%RH

8. Environmental Storage: Temperature: (10~40)°C, Humidity: ≤80%RH