Product Center

I. Product Introduction

Automatic Oil-Water Separator,This product is a crystallization of the wisdom of the national environmental protection policy advocates.,Is tailored for the wastewater discharge in the current catering industry market,A brand new product for automatic oil-water separation.

Integrated full-automatic oil-water separator with slag removal,Basicly equipped with four functional zones:Sludge removal area, heating zone, degreasing area, sewage lifting area; when sewage enters the functional area, a manually operated sludge removal basket inside the equipment filters out particles larger than5mmAll large granular impurities (Fully automatic slag removal machines can be used to automatically remove)3.0-4.0mmThe above debris is automatically removed and discharged through a microcomputer-set time and duration, either continuously or intermittently, and then flows into the automatic oil-removal zone. The power section of the oil-removal zone is controlled by a microcomputer, allowing for static oil removal at any time and duration. After oil removal, the wastewater is directly drained into the filtering area via a baffle. After filtration and treatment, the wastewater is either discharged directly or forced into the urban pipeline using a lift pump.

Fully Automatic Sludge Oil-Water Separator, breaking the traditional operational model where manual separation is not feasible for small and medium water volumes, achieves a lazieman-style intelligent operation, and prevents secondary pollution.
 
Section Two: Working Principle of the Efficient Automatic Oil-Water Separator
The Automatic Dreg Oil-Water Separator is our company's newly developed domestic advanced wheel separation technology product. This series consists of the dreg removal area, oil-water separation area, oil removal unit, filtration area, and wastewater lifting area.
The slag area is equipped with an automatic slag removal device. Slag and decaying leaves flowing in with the water are discharged from the box under mechanical force into a collection bucket. If slag removal baskets are chosen, impurities are manually emptied by hand.
The oil-water separation zone is equipped with a microbubble generator that produces a large number of fine, uniform microbubbles. These bubbles cover the entire cross-section of the flowing water, without any vortex formation on the water surface. The oil in the wastewater is carried to the surface by the microbubble device, causing the water and oil to separate layers. This product can remove over 95% of oil particles larger than 60um, and the oil content of the effluent from the equipment can meet the third-level emission standard of the Comprehensive Wastewater Discharge Standard (GB8978-1996), and even reach the second-level emission standard.
The degreasing unit employs wheel-type degreasing, where floating oil is pushed into the oil tank by the degreaser. Upon opening the ball valve, the oil automatically flows into the collection drum outside the box, eliminating the need for manual cleaning. The degreasing area is equipped with heating devices to ensure smooth automatic oil discharge. When grease solidifies into solid grease, the electric heating unit can be activated to heat the grease back to a liquid state, enabling automatic discharge from the box.

The filtration zone utilizes non-replaceable biofilter cores, where wastewater enters a secondary filter for additional filtration of minimal floating oil and trace suspended solids. The enhanced discharge area features a pump and impeller enclosed in a specially designed stainless steel casing for elevated pump, transporting the treated wastewater to the sewage pipeline or municipal network.

III. Feature Introduction:
1、 Automatic Grease Removal System
When the oil level inside the equipment reaches a certain height, the mechanical scraper system automatically operates, scraping the floating oil into the oil collection sump, which then flows into the external oil storage drum. Once the drum is full, it is removed at regular intervals.
2、 Air Floatation Device
The oil separator is equipped with an air flotation unit within its oil collection zone. This unit consists of a micro compressor fan and microporous aeration devices. The purpose is to cause the oil in the waste water within the oil collection zone to attach to extremely tiny bubbles and quickly rise to the surface, ultimately floating out. Once the floating oil layer reaches a certain height, the automatic skimming system then scrapes it into the oil collection trough, achieving the goal of oil-water separation.
3、 Heating System
To prevent animal oil from solidifying in winter, which may affect grease separation and skimming efficiency, our company's automatic grease separator/skimmer features a heater in the grease collection area. This ensures that the oil does not solidify into lumps at low temperatures, facilitating easier grease discharge.
4Automatic Sludge Discharge System
Avoid the hassle of frequent descaling later on, reduce labor costs, and enhance efficiency.
 
 4. Key Features of High-Efficiency Automatic Sludge Oil Separator
1、High compressive strength:Fully stainless steel dense structure design, capable of withstanding pressure and impact without the need for any additional reinforcement measures, suitable for use under various conditions.
2、Small land areaThe product has a compact structure, occupying less land area, with an actual land area of about 60% of a traditional grease trap, thus saving land resources.
3、Installation is quick and convenient:Factory production, lightweight, easy to transport and install, flexible site selection, short construction period, low construction costs, ready for use the same day.
4、Leakproof, excellent tightnessThis product is manufactured with cutting-edge technology, free of cracks and leaks, thereby preventing the traditional grease traps from contaminating groundwater and compromising the safety of buildings due to leaks.
5、Good environmental benefits, easy to clean out, low economic indicators
This product is an ideal choice for its excellent quality and affordable price, highly praised by real estate developers, construction companies, and project investors.
6、Durable and made of stainless steel
Utilizing high polymer composite materials, in line with the trend of material development, it is resistant to aging and deformation, acid and alkali resistance, corrosion resistance, and has a lifespan equal to that of the building under normal use, eliminating the issue of traditional grease traps not being suitable for acidic wastewater.

FiveEfficient Automatic Sludge Oil-Water Separator User Manual and Maintenance
1. Ensure that the equipment's in and out water pipes and all components are properly connected without leaks, and the electrical control parts are correctly wired.
2. After the first use and cleaning of the equipment, it must be filled with water before starting the device.
3. The equipment will be set up according to the customer's situation prior to shipment. It is recommended to switch the equipment control box to the automatic mode upon use.
4. Equipment should be managed and operated by designated personnel, and the current values and insulation should be checked regularly and at scheduled times.
5. Regular inspections should be conducted to check for any leaks in the equipment's various components.
6. Regular inspections of the debris separator box are required.