Dry Box, Rubber二次Curing Oven, Industrial Oven
Re Vulcanization Oven
Usage: The temperature for secondary vulcanization of rubber varies depending on the material, as does the time for constant temperature heating. For example, NR generally does not use two-stage sulfur addition due to its high likelihood of vulcanization reversal. If necessary, it is recommended to be around 100℃ for about 2 hours; for SBR, BR, typically use 100-120℃ for 1-2 hours; for NBR, EPDM (vulcanization), generally use 140-150℃ for 2-4 hours; for EPDM (peroxide), generally use 150-160℃ for 2-4 hours; for Silicone, typically use 200-230℃ for 4-8 hours; for FKM, generally use 200-230℃ for 8-12 hours. Therefore, the temperature for secondary vulcanization of rubber products usually ranges from 100℃ to 300℃.
The vulcanization process is primarily used to enhance the properties of rubber products. Before vulcanization, rubber lacks cross-linking between its molecules, resulting in poor physical and mechanical properties and limited practical value. Upon the addition of vulcanizing agents and subsequent heat treatment or other methods, cross-linking occurs between rubber molecules, forming a three-dimensional network structure, thereby significantly improving its performance.
Product Performance Features:
1.Material: Inner lining made of stainless steel, outer case made of steel plate with electrostatic powder coating, thermal insulation material is aluminum silicate.
2.Utilizes a dual-channel circulation structure for uniform temperature field distribution.
3.Adjustable ventilation volume
4.Temperature control is achieved with a Fujitsu instrument, allowing for precise constant-temperature settings and easy operation.
5.Door seals are made of heat-resistant silicone rubber, ensuring hygiene and safety.
6.Equipped with sound and light over-temperature alarm and protection device
7.RTD temperature sensor, precise temperature measurement
8.Protection Devices: Over-temperature protector, motor overload protector, buzzer, fault indicator light, fuseless switch.
Technical Specifications:
1Blow type: Forced air circulation
2Temperature Range: RT +10℃ to 300℃
3Temperature Fluctuation: <±0.5℃
4Uniform temperature: ±1.5% (measured according to standard: measurement point at the SENSOR placement, 1/10 of the internal box wall dimension)
5Temperature Control Device: Fuji P.I.D intelligent temperature control gauge, LED digital display and setting, P.I.D automatic calculation, time timer
Temperature Control Output: SSR Output, Omron Relay, Solid State Relay
Thermometer: 1 piece of PT100 platinum resistance temperature sensor device, accurate temperature measurement
Timer Device: HS48S-99.99 Timer Gauge
6Specialty Composite Electric Heater
7During forced air circulation aging tests, natural air circulation aging tests can also be conducted simultaneously.
Technical Specifications Dimensions:
Model: LD-1000-SVOR
Working Dimensions (mm): W1400 x H1200 x D600
Dimensions: W1990 x H1950 x D810 mm
Power: 14.0 kW
Power: AC 380V/50Hz
Please contact our sales representatives for other specifications, sizes, and special features.
