Ultra-low humidity constant temperature and humidity chamber, low temperature and low humidity test chamber, 5% humidity test chamber applications
Ultra-Low Humidity Constant Temperature and Humidity Chamber simulates the technical conditions of GB/T10586-2006湿热试验箱, GB/T10589-2008低温试验箱, and GB/T11158-2008高温试验箱. It is primarily designed for research and production units in aerospace, aviation, petrochemical, military, automotive (motorcycle), shipbuilding, electronics, and telecommunications industries. It provides environments with varying temperatures and humidity for simulating tests, including vibration adaptation tests under temperature and humidity changes and reliability tests for the safety of electronic components, as well as product screening.
Ultra-low humidity constant temperature and humidity chamber, low temperature and low humidity testing chamber, 5% humidity test chamber specifications
3.1 Studio Size | W500×D500×H600mm, 100-5000L available |
3.2 Dimensions | Approximately 1020mm x 1280mm x 1620mm (Depth x Width x Height) |
3.3 Material | The inner box is made of high-quality SUS304 stainless steel, while the outer box is custom-finished with high-quality cold-rolled steel powder coating. |
3.4 Temperature Range | -100℃～+120℃ |
3.5 Temperature fluctuation | ≤±0.5℃ |
3.6 Temperature Uniformity | ≤±2℃ |
3.7 Temperature Deviation | ≤±2℃ |
3.8 Relative Humidity Range | 5%～95%RH |
3.9 Humidity Deviation | ≤±3%RH |
3.10 Humidity Fluctuation | ≤±2%RH |
3.11 Auxiliary Equipment | Air Drying Defrosting System |
3.12 Meets Standards | GB10586-2006 Technical Conditions for Humidity and Heat Test Chambers GB10592-2008 Technical Conditions for High and Low Temperature Test Chambers GB/T 2423.1-2008 Basic Environmental Test Procedures for Electrical and Electronic Products - Test A: Low Temperature Test Method GB/T 2423.2-2008 Basic Environmental Test Procedures for Electric and Electronic Products - Test B: High Temperature Test Method GB/T 2423.3-2006 Basic Environmental Test Procedures for Electrical and Electronic Products, Test Cab: Constant Humidity Test Method The above standards and specifications shall be replaced by the new ones if superseded, and the new ones shall be implemented. Any other agreements between the parties shall be executed as per the agreement. |
