Anaerobic Oven Sterile Anaerobic Oven High-Temperature Program Anaerobic Curing Furnace Operation Instructions
Plug in the power
Turn on the equipment switch
② Set Parameters
Set the required parameters according to the instruction manual.
③ Introduce sample gas
Introduce clean test sample gas, adjust the flow control valve to achieve a sample gas flow rate of 300 mL/min.
④ Measurement Reading
Instrument measurement data will initially fluctuate, then gradually stabilize, with the instrument continuously analyzing the oxygen concentration of the measured gas.
End Measurement
If no further measurement is required, disconnect the test gas from the instrument, and conclude the measurement.
Display Curve
The instrument features data saving and curve recording functions, capable of real-time automatic recording of current measurement data and other information, facilitating future retrieval of historical measurement data.
Anaerobic Oven Sterile Anaerobic Furnace High-Temperature Programmed Anaerobic Curing Furnace
PrecisionOxygen-Free OvenSpecial process requirements for drying and curing of precision electronic components, PI, BCB, LCP, photoresist curing, and ceramic materials, simulating linear temperature rise and drop environments, especially suitable for the non-oxidation drying and curing process requirements in industries such as semiconductor manufacturing, COB packaging, hygiene, flexible PCB printing, and precision mold annealing. Widely used in industries including electronic products, hardware products, hygiene, instruments and meters, factories, colleges and universities, scientific research, etc.
Anaerobic Oven / Sterile Anaerobic Furnace / High-Temperature Program Anaerobic Curing Furnace Technical Specifications:
Temperature Range: RT+50 to 450/550°C
Inner box size: 450×450×450mm (multiple sizes available for customization)
Thermal Control Method: Curve heating and cooling
Oxygen Content: ≤20ppm
Temperature Control Stability: ±0.5℃
Temperature Uniformity: ≤±1.5%℃
