Composition  Comprised of imported resins, colorants, fillers, additives, and mixed solvents.

Performance   This product can dry naturally or be dried, has strong adhesion with the primer, good sealing properties, enhances the fullness and luster of the topcoat, and is easy to sand.

Usage Decorative for mid-coating on sedans, vans, and light vehicles, especially suitable for glass fiber reinforced plastic substrates.

Technical Specifications

Construction Parameters:

Ratio: Main Agent: Curing Agent = (6:1)

2. Thoroughly mix the main agent, then dilute to the construction viscosity using our company's BU thinner, typically 16~22 seconds.

3. The paint should be allowed to mature for 20~30 minutes. Filter with a 150 mesh copper wire mesh before spraying.

4. The coating can be applied wet-on-wet in 2 to 3 coats, with a drying time of 10 to 15 minutes between each coat.

After the paint film dries, fill in the sand holes with quick-drying putty. After 30-40 minutes, sand with 600-800 grit water-sanding paper until dry. Then dust off before applying the topcoat.

Storage and Transportation

1. Products should be stored in a well-ventilated, dry environment, protected from direct sunlight, and away from any fire sources. Storage temperature should be maintained between 5~40℃.

2. The product should be protected from rain and direct sunlight during transportation, and should comply with relevant regulations.

3. Product Shelf Life: 12 months from the date of manufacture。