Composition  Made from imported resins, pigments, fillers, additives, and mixed solvents.

Performance   The product can dry naturally or be dried, has strong adhesion with the primer, good sealing properties, enhances the fullness and luster of the topcoat, and is easy to sand.

Usage Decorative for mid-coating on sedans, vans, and light vehicles, especially suitable for glass fiber reinforced plastic substrates.

Technical Specifications

Construction Parameters:

Ratio: Main Agent: Curing Agent = (6:1)

2. Thoroughly mix the main agent, dilute to the application viscosity using our company's BU thinner, which is typically between 16 to 22 seconds.

3. The paint should be allowed to mature for 20~30 minutes. Filter with a 150-mesh copper wire mesh before spraying.

4. The paint can be applied wet-on-wet in 2 to 3 coats, with each coat separated by 10 to 15 minutes.

After the paint film dries, fill in the sand holes with quick-drying putty. After 30 to 40 minutes, sand it smooth with 600 to 800 grit wet-and-dry sandpaper. Dust off before applying the topcoat.

Storage and Transportation

1. The product storage environment should be well-ventilated, dry, protected from direct sunlight, and isolated from fire sources, kept away from fire, with storage temperatures between 5~40℃.

2. Products should be protected from rain and direct sunlight during transportation and must comply with relevant regulations.

3. Product Shelf Life: 12 months from the date of manufacture。