ZYG-10 Igniter User Instructions

This igniter features a special high-performance power control chip design, widely used for igniting various gases, oils, and combustible solid particles (such as wood chips and wood), ensuring safe and reliable ignition.

Technical Specifications:

Working Power: DC24V, 50-60Hz

High-voltage Output Cable Length: 1 Meter

Input Voltage: 24V     Input Current: 1A

Output Voltage: 10KV Output Current: 50mA

Electrode Distance: 3-5mm

Shell: Plastic Shell

Cautionary Notes:

1. Absolutely forbidden to connect the ignition power supply to the igniter without a grounded electrode.

2. The ignition electrode must be securely connected to the burner exterior.

3. The igniter's high-voltage output is the red wire, which must be connected to the ignition electrode to prevent accidental electric shock accidents.

4. Spark discharge occurs at the ignition electrode tip (away from the high-voltage wire end).

5. ZYG-20 Igniter Operation: Upon connecting the 220V power supply, the igniter begins operation. Each ignition lasts approximately 5 to 15 seconds, followed by a 15-second pause before it can be used again. The ignition can be cyclically repeated. Avoid continuous long-term use to prevent damage to the igniter.