I. Product Introduction:

Plasma Ignition DevicePrimarilyExplosion-proof plasma ignition unitHigh-pressure ignition wires and plasmaIgnition LeverComposed of several parts, this product features a high-performance ignition circuit, ensuring stable performance and reliable operation. It is primarily used in oil drilling exploration and development for burning flammable and harmful gases or waste gases emitted during the process, eliminating their environmental and safety hazards. It is a safe and environmentally friendly equipment.

Section II: Main Technical Parameters of Plasma Explosion-Proof Igniters

1. Operating Voltage: 220VAC, 50Hz

2. Environmental Temperature: -40～80℃

4. Output voltage: 20KV.

5. Spark energy 1000J...Power 1KW.

6. Operation Mode: Manual, Automatic.

7. Ignition rod tip; heat-resistant up to 1200 degrees.

III. PlasmaIgnition DeviceInstallation:

1. The explosion-proof box is mounted near the ignition point. Ensure the explosion-proof box is waterproof and cover it with a waterproof and sunshade canopy.

2. Ensure the high-voltage connection is properly made to the plasma防爆ignition box.Ignition WireReconnect the plasma ignition rod. Supply the explosion-proof box with 220V power.

3. Press the 220V power switch button, the power indicator light illuminates, and manually ignite the button; the plasma ignition rod automatically ignites at the front end.

4. The plasma ignition rod generates a plasma arc at the front during operation, with an arc length of about 100mm, which can completely replace open flame. Due to the high output voltage during operation, the ignition rod must not be touched to prevent any unsafe incidents.

5. Ignition rod installation (threaded connection) is quick and easy; the ignition rod is installed according to the on-site conditions, with a feature that prevents incorrect plug-in of the connection wire.

6. Compared to standard ignition devices, it requires higher energy release, stronger ignition capability, and electrodes that can withstand higher temperatures.

Section 4: Ignition Device External Dimensions:

1. Plasma Ignition Device Control Box Dimensions (approx.): 300×400×200mm

2. Ignition Rod: L=2000mm (Custom made according to on-site conditions)

3. Ignition rod diameter φ45mm, with the option for a straight root or a bent rod (custom made according to on-site conditions by the customer)

4. High-voltage ignition connection cable: 20 meters. (Customizable according to on-site conditions.)

Section 3: Field Installation Simulation of Ignition Device