GDQ-12 High-Energy Igniter, designed for automatic ignition of industrial burners. This product is compact in size, high in energy, with a fire-end that withstands high temperatures, resists carbon accumulation, and has self-cleaning capabilities. It boasts high ignition reliability, outperforming imported ignition transformers. The installation of the ignition rod is convenient, and no adjustment of the ignition electrode discharge distance is required. The igniter controls the ignition time by regulating the power-on time, and it does not come with a switch.
Section 1: Technical Specifications
1. Power Voltage: 220V ±10%, 50Hz
2. Applicable Fuel: Gas
Output Voltage: 2500V
Ignition Frequency: 8-16 Hz
5. Arc Energy 12J
6. Ignition Tip Temperature Resistance: 1300°C
Section 2: Igniter Outline and Installation Dimensions
Dimensions: 140*130*85mm
Installation Dimensions: 130*135
Mounting hole Φ4.0
Three: Ignition Rod
1. Ignition tip front material: Kanthal high-temperature alloy, SEMND high-temperature material
2. Ignition rod connection and installation with M18*1 thread, diameter φ16
3. Length and外形 dimensions are made to customer's specifications
Four: High-voltage Ignition Cable
1. Ignition-specific cable is a high-temperature, high-pressure cable, capable of withstanding a voltage of 20kV/AC, with an operating temperature range of -60℃ to 200℃. Length is available according to customer requirements.
2. Threaded connector is M18x1.0
V. Installation and Wiring
Hole the burner and machine an M18*1 installation thread at the hole opening. Simply screw in the ignition rod. This ignition rod features a new design, eliminating the need to adjust the sparking distance, and can withstand long-term temperatures of up to 1300 degrees.
The ignition rod's firing end is installed 20 to 30mm in front of the burner nozzle, with the gas burn nozzle having a shorter distance.
VI. Usage
1. ThisIgnition DevicePlease provide the Chinese content to be translated.High-energy ignition deviceThe ignition end is resistant to carbon buildup, allowing it to spark even under carbon accumulation. Therefore, users do not need to clean the ignition end during operation and can use it with confidence.
2. The ignition device should operate for 6-8 seconds before taking a 30-second break to avoid continuous long-term use.
3. The front end of this ignition rod features a special structure; users cannot saw off a section of the rod for use.
