Drying Oven with PLC Vacuum Degree Programmable Dryer Industrial Automation Oven Oven
Vacuum Dryer (PLC Programmable Vacuum Level)
Application Fields: Widely applied in various research fields such as chemical, biological, pharmaceutical, scientific research, and environmental testing; used for drying, baking, sterilization, and testing of powders, thermally sensitive materials, easily decomposable substances, and oxidizable materials under vacuum conditions.
Product Application:
This equipment reduces the vacuum level and oxygen content inside the vacuum chamber through staged vacuum extraction, suitable for potting processes to remove bubbles from adhesive, preventing adhesive overflow. Vacuum Drying OvenPLCControlled programming designed to meet stringent vacuum pressure curves in the electronics industry, reducing oxygen content through staged vacuum extraction, thereby preventing moisture absorption, drying electronic components, and avoiding oxidation, dust, and particles.
Product Features:
Streamlined design, outer shell with electrostatic powder coating on cold-rolled steel, inner lining made of stainless steel, zero dead corner design for easy cleaning.
2. Radiant heating methodEnsure even and stable temperature distribution, allowing the dried material to receive thorough and even heating.
3. The heating power ratio can be adjusted at will, ensuring that there is no temperature disadvantage in low-end temperature control.
4. Equipped with microcomputer PID control, the system features automatic temperature control, timing, over-temperature alarm, and an LCD display. Accurate and stable temperature control, reliable performance.
5. The inner box is equipped with a vacuum pump. The vacuum program is achieved through an intelligent PLC touch screen module for segmented programming of vacuum levels, automatic control of vacuum degree, automatic nitrogen filling, and automatic inflation/decompression.
6. The box door features a large-angled observation window with superior heat-insulating technology, keeping the window temperature within a reasonable range for safe use.
7. Utilize high-quality thermal insulation materials and technology to minimize temperature loss within the box, reducing energy consumption and promoting energy efficiency.
8. Install a condenser at the front of the vacuum pump. By evacuating the vacuum, a large amount of moisture or solvent evaporated from the material inside the vacuum chamber can be condensed into a liquid state and stored in the tank. Only a small amount of moisture or solvent is drawn into the vacuum pump, preventing rapid degradation and offering protection to the pump. The condenser is mainly used for collecting moisture and solvent as well as protecting the vacuum pump (optional).
Model and Specifications:
Name | Vacuum Dryer Box | |||
Model | PVD-050-PLC | PVD-090-PLC | PVD-210-PLC | PVD-250-PLC |
Volume | 50L | 90L | 210L | 250L |
PLC Control | PLC vacuum control or PLC temperature and vacuum control | |||
Temperature Control Range | RT+10～250℃ | |||
Temperature Resolution | 0.1℃ | |||
Temperature Control Accuracy | ±0.5℃ | |||
Cargo carrier bracket | 2PCS | 3PCS | ||
Vacuum Level | <133Pa | |||
Vacuum Pump | Built-in 2XZ-2 | Built-in 2XZ-4 | ||
Power Supply | AC220V/50Hz | AC380V/50Hz | ||
Rated Power | 1.77KW | 2.77KW | 4.15KW | 4.55KW |
Inner diameter size | 415X370x345 | 450x450X450 | 560x640X600 | 700x600X600 |
Dimensions | 720x515X1120 | 620x605X1405 | 730x800X1670 | 1225X765X1550 |
Dimensions: mm (millimeters)
Optional Features:
SS - Stainless Steel (SUS304, 316L)
Temperature and Pressure Recorders
LZ-Condenser BS-Bio-Specific (Temperature Range 50-65)
HC- Heavy-duty Partition (Supports 50kg, Standard Load 15kg)
Temperature Selection: 300°C, 400°C, 450°C, 500°C
Vacuum pump:DM4、DM8、DM15Please provide the Chinese content you would like translated.2XZSeries vacuum pumps are selected according to requirements.
