Bai-level cleanroom drying oven/oven/dryer
Bai-grade cleanroom oven
Cleanroom OvenAlso known asClean Dry OvenOrClean OvenWe offer specialized equipment for environmental purification, commonly using air filters to purify the environment and prevent fine particles from entering the box. The internal air is sealed and recirculated, passing through a 100-grade high-efficiency, high-temperature air filter for repeated filtration, maintaining a dust-free workshop. The temperature control instrument automatically regulates temperature and time, equipped with an over-temperature automatic power-off and alarm circuit for reliable control and safe operation.
The applications of dust-free ovens: Suitable for electronic liquid crystal displays, LCDs, CMOS, IS, pharmaceuticals, and laboratory production and scientific research departments. Also used for drying, heat treatment, aging, and other high-temperature tests for non-volatile and non-flammable, non-explosive items.
I. Technical Features of the Cleanroom Oven:
1.In standard operating conditions, it ensures the cleanroom interior achieves Class 100 (100 Class) purity.
2.Air is delivered horizontally from the rear to the front, then passed through a 20"×20" American-imported H.E.P.A Filter, and directed towards the front door (with a special duct design). The filtration efficiency is 99.99%, Class 100, exhaust outlet: φ5mm (with an automatic opening and closing air door).
3.The oven is assembled from the cabinet, electrical control cabinet, electric heating, and air duct system, featuring a reasonable structure and an aesthetically pleasing appearance.
4.Full week argon welding, high-temperature resistant silicone clamps, SUS304# stainless steel electric heater, dust-proof for the microdust generated by the machine itself.
5.Box Material: The outer box is made of SS41# medium carbon steel plate with coated paint baking finish, which can prevent micro-dust.
6.Inner material: Made of 2mm thick mirror finish SUS304 stainless steel plate, cleaned with alkaline soda ash solution to remove oil stains and prevent particle formation during baking.
7.Material for Medium Drum: Made of 2mm thick mirror finish SUS304 stainless steel sheet, cleaned with alkaline soda ash water, free of oil stains, and argon arc welding sealed for anti-contamination.
Section 2: Temperature Control System
1．Equipped with a Japanese OMRON E5A temperature controller, featuring LED digital display and setting, PID automatic calculation, and thin-film setting, with accuracy of ±0.3%FS.
2Signal Source: Imported Japanese CA Inductive Rod ±0.5%.
3Output controlled components: SSR contactless signal output.
Section 3: Execution Standards
1.GB/T11158-1989High-Temperature Test Chamber Technical Specifications
2.GB2423.2-1989Test B
IV. Safety Protection Measures:
1Leakage Circuit Breaker
2Control circuit fuse assembly
3Over-temperature Protection Device
4Electrical Overcurrent Protection Device
5Overcurrent protection for motor
6．Machine abnormal buzzer alarm
7Reverse Preventer
8Doorfront Safety Switch
V. Select Configuration
1.Programmable thermostat
2.Six-point temperature recorder
3.Three-color indicator light
4.Recorder
Specification Model and Technical Parameters:
Product Name | (Bai-level cleanroom oven | |||||
Model | TACOL-180B | TACOL-270B | TACOL-480B | TACOL-980B | ||
Volume (L) | 180L | 270L | 480L | 980L | ||
Cleanliness Class | Class 100 # | |||||
Power Supply | AC380V/50HZ | |||||
Power (KVA) | 7.5 | 10.5 | 11 | 17 | ||
Dust concentration in the studio | ≥0.5UMDust particle≤3.5Peach/Ascend | |||||
Work environment temperature | 5℃～+35℃ | |||||
Sex Available | Temperature Range | 60℃～+300℃ | ||||
Temperature Fluctuation | ±0.5℃ | |||||
Uniform temperature distribution | 200±3℃ 300±4℃ | |||||
Rise time | 40Within minutes (at room temperature to +300°C) | |||||
Please provide the Chinese content to be translated. Structure | Shell Material | Rust-proof treated cold rolled steel plate, surface with plastic coating | ||||
Inner lining material | SUS304#Stainless Steel | |||||
Insulation materials | Glass Wool | |||||
Heater | Covered electric heater | |||||
Inlet | （N2 or Clean air）φ6mm | |||||
Ventilation outlet | φ5mm Automatic Exhaust Door | |||||
Temperature Control System | Adjustment method | PIDControl Method | ||||
Operation method | Setpoint operation, program operation | |||||
Set Scope | 0～+300℃ | |||||
Set-up Method | Digital | |||||
Display Method | LEDDigital Display | |||||
Sensor Components | KType thermocouple | |||||
Safety Protection | Input loss detection function, upper temperature overheat alarm function, buzzer alarm function, automatic overheat prevention function, automatic diagnostic function | |||||
Timer function | 0.1～999.9H | |||||
Safety Protection Device | Leakage Circuit Breakers for Power Supply, Motor Temperature Protection Switches, Temperature Fuses, Independent Overheating Prevention Device | |||||
Number of partitions and load-bearing capacity | 2PCS（30 KG） | |||||
Approximate Net Weight:KG） | 260 | 320 | 450 | 730 | ||
Interior Size (W*H*D）mm | 600x600X500 | 600x900X500 | 800x1000X600 | 1400x1000X700 | ||
DimensionsW*H*D）mm | 950x1510X1240 | 950x1810X1240 | 1290x1790X955 | 1950x1790X1055 | ||
Selection options | Programmable temperature controller, recorder, six-point temperature display, three-color indicator lights | |||||
Note: This data is under environmental temperature25Measured under no-load conditions at °C.
Dimensions include fan housing and castor height
