Silicone High-Temperature Coating with Resistance up to 700℃

Group    Please provide the Chinese content that needs to be translated into American English.    BySilicone-based productsResin, active anti-rust pigments, penetrants, hardeners, and additives, etc.。

Sex    Available   This productBoasts high-temperature resistance and excellent weathering and corrosion resistance. The film connects inorganic substances like silicones and silicates after high-temperature treatment, thereby protecting the base material. This product improves the poor corrosion resistance of previous silicone coatings under normal and high temperatures, as well as during water washing and alternating cold and hot conditions.

Please provide the Chinese content you would like translated into American English.    No Chinese content provided, so returning the original character: 途   Commonly used for temperatures ranging700Sub-zero base material surfaces provide decorative, protective, and anti-corrosion/rust functions. Applications include bonfire bowls, barbecue grills, car exhaust pipes, and fireplaces, etc.

Product Specifications

Technical Specifications

Construction Method

1. Base Material Processing

Prior to painting operations, the substrate surface should be cleaned of oil, rust, foreign matter, etc. Sandblasting toSa2 grade, remove residual paint, rust, and oxide scale.

2. Mixed (for two-component paints)

Priced by weight ratio (as indicated on the product packaging)

While mixing, slowly pour the hardener into the main agent while continuously stirring to ensure thorough and even mixing.

Mixed paint maturationAfter 20 minutes, filter through a 60-80 mesh screen and pour it into another container for later use.

Mixed paint shelf life3 hours, please use as per the construction progress.

3. Baking (suitable for one-component paint)

4. Construction Conditions

Spraying operations should be carried out as soon as possible after the substrate treatment, generally not exceeding8 hours. The surface temperature of the substrate and the ambient temperature should generally not be lower than 10°C, with the surface temperature at least 3°C above the dew point, and the relative humidity of the air should not exceed 85%.

5. Coating Methods

This paint can be applied using brush coating, airless spraying, and air-assisted spraying methods.

6. Dilute

In most cases, paints require a compatible thinner to adjust viscosity and clean tools.

7. Coating Spacing

    One-component paint is ready for subsequent coating after drying. For two-component paint, it is recommended to allow the following curing interval before coating: