Product Description:

Ceramic electric heater performance:

1. Fast heat transfer, even heat distribution, and stable operation.

2. Temperature is not leaked out, saving electricity; the outer cover is not hot to the touch when handled, ensuring safe operation.

3. The product boasts a high power output, with the ceramic rod threading method increasing the power by 0.5 to 1.5 times compared to the standard version.

4. High-temperature heating wire for Europe and America, featuring fast heat dissipation, even heating, and stability at high temperatures, suitable for long-term use between 600-800°C.

5. Long product lifespan due to slow aging of raw materials under high temperatures.

6. Meets all national GB technical requirements. Power deviation: +5% to -10%.

7. Electrical Strength: Passed a 2500V/50Hz sinusoidal AC voltage test without any breakdown phenomenon for 1 minute.

8. Available in wiring configurations to meet customer requirements, voltages range from 36V, 110V, 180V, 220V, to 380V. High-power loads up to 6.5W per square meter, offering a 30% reduction in energy consumption compared to traditional electric heaters.

Cautionary Notes for Using Ceramic Electric Heaters:

1. Ceramic electric heater is not waterproof, so avoid contact with oil, water, and plastic particles during storage and installation to prevent electric leakage.

2. The ceramic electric heater must be tightly adhered to the object being heated during installation. The surface of the heated body should be flat and intact, without any unevenness.

3. If a charred black color appears on the surface after use, it indicates an imbalance in heat generation and heat dissipation. Adjustments should be made promptly to prevent burning through.

4. When using a high-temperature ceramic electric heater for heating, avoid striking or碰撞 with hard objects to prevent tile breakage and expose the alloy resistance wire, which can affect the operational lifespan.

Before installation, check that the installation location matches the specifications of the ceramic electric heater and that the voltage is consistent.

Ceramic Electric Heater Design and Customization:

1. Voltage, power (usually 6W/cm²)

2. Specify exact dimensions: outer diameter, inner diameter, and height

3. Special Matters: Do you need a wiring box, a housing with a fan cover, etc.?

Ceramic Electric Heater Related Product Images: