Oil Drum Heater
I. Overview of Oil Drum Heater:
By heating, the liquid and solidified materials inside the drum become easily removable, such as adhesives, greases, asphalt, paints, paraffin, oils, and various resin raw materials. The drum's heating reduces their viscosity uniformly, easing the pump's effort. Consequently, this device is not affected by seasons and can be used year-round. The oil drum heater is integrated with a temperature control unit, allowing users to adjust and control the working temperature of the heater.
Two,Oil Drum HeaterFeatures:
The oil drum heater surface is equipped with a temperature controller, which directly regulates the temperature (usually 30-150 degrees) via the controller. Commonly used for heating and maintaining temperature in 200-liter standard oil drums, it is also widely used for heating other drum bodies and maintaining the valves' temperature.
Section 3:Oil Drum HeaterOperating Principle:
The product is mainly composed of nickel-chromium alloy wire and insulating materials, featuring rapid heat generation, high thermal efficiency, and a long service life.
2. The alkaline-free glass fiber core is wrapped with electric heating wire, with silicone rubber as the main insulation, offering excellent thermal resistance and reliable insulation properties.
3. The product features excellent flexibility, allowing it to be directly wrapped around heating equipment with good contact and even heating.
IV. Specifications of Oil Drum Heater Products:
Insulating material maximum heat resistance temperature: 250℃
2. Recommended Temperature: <200℃
3. Insulation Resistance: >50MΩ
4. Dielectric Strength: >1500V/min
5. Power Deviation: ±5%
V. Specifications of Oil Drum Heater Products:
Oil Drum Heater, 200 Liter Capacity | Oil Drum Heater, 20 Liter Capacity | Oil Drum Heater, 200-liter Capacity | |
Dimensions | 250*1740 mm | 200*860 mm | 125*1740 mm |
Capacity | 220V 2000W | 220V 800W | 220V 1000W |
Weight | Approx: 1.4 kg | Approx.: 0.55 kg | Approx: 0.7kg |
Bucket diameter | Approx. 580 mm | Approx. 300 mm | Approx.: 580 mm |
Temperature Control 30~150℃ EGO | |||
Section 6: Installation Requirements for Oil Drum Heaters
1. During installation, the silicone flat surface of the electric heating tape should be firmly adhered to the surface of the oil drum or tank.
2. To minimize heat loss, an insulating layer should be added to the outer side of the electric heating tape.
3. Absolutely no overlapping or tangled installation is permitted to prevent overheating and damage.
Seven: Oil Drum Heater Precautions: Moisture-proof specification: end panel material, simple moisture-proof; not suitable for long-term use in water or frosty areas. The temperature of the heater may vary depending on the environment, material, and shape of the object being heated.































