Thermal oil furnace
One,Thermal oil furnaceOverview:
A thermal oil furnace is a new type, safe, and energy-efficient industrial furnace that operates at low pressure (either at atmospheric pressure or lower) and provides high-temperature heat energy. It uses thermal oil as the heat carrier, circulated by a thermal oil pump, to transfer heat to the heat-using equipment.
The electric heating thermal oil system is composed of an explosion-proof electric heater, an organic heat carrier boiler, a heat exchanger (if applicable), an on-site explosion-proof control box, thermal oil pump, expansion tank, etc., forming a skid. Users simply need to connect the power supply, the inlet and outlet pipes of the medium, and some electrical interfaces to start using it.
Section Two:Thermal oil heaterWorking Principle:
For thermal oil heaters, heat is generated and transmitted by electric heating elements immersed in the thermal oil. Using thermal oil as the medium and a circulating pump, the thermal oil is forced to circulate in the liquid phase, transferring heat to one or more heating equipment. After unloading by the heating equipment, it returns through the circulating pump to the heater, absorbs more heat, and then transfers it to the heating equipment again. This cycle repeats continuously, achieving continuous heat transfer, raising the temperature of the heated object to meet the heating process requirements.
Section 3: Thermal oil furnace model specifications:
Model | Voltage (V) | Supplying heat kcal/h | Power (KW) | High Temperature: ℃ | Recirculating pump | Inch pipe size for import/export | ||
Flow Rate (m³/h) | Power (KW) | Imported | Export | |||||
SWDL-T-50 | 380 | 43000 | 50 | 320 | 8 | 1.5 | DN32 | DN32 |
SWDL-T-80 | 380 | 69000 | 80 | 320 | 10 | 2.2 | DN40 | DN40 |
SWDL -T-100 | 380 | 86000 | 100 | 320 | 12.5 | 3.0 | DN50 | DN50 |
SWDL -T-125 | 380 | 107500 | 125 | 320 | 20 | 4.0 | DN50 | DN50 |
SWDL -T-200 | 380 | 172000 | 200 | 320 | 20 | 4.0 | DN50 | DN50 |
SWDL -T-250 | 380 | 215000 | 250 | 320 | 29 | 5.5 | DN50 | DN50 |
SWDL -T-300 | 380 | 258000 | 300 | 320 | 40 | 5.5 | DN80 | DN80 |
SWDL -T-400 | 380 | 344000 | 400 | 320 | 40 | 5.5/7.5 | DN80 | DN80 |
SWDL -T-500 | 380 | 430000 | 500 | 320 | 60 | 7.5/11 | DN100 | DN100 |
SWDL -T-600 | 380 | 516000 | 600 | 320 | 80 | 15 | DN125 | DN125 |
SWDL -T-800 | 380 | 688000 | 800 | 320 | 100 | 22 | DN125 | DN125 |
SWDL -T-1000 | 380 | 860000 | 1000 | 320 | 120 | 22 | DN150 | DN125 |
SWDL -T-1200 | 380 | 1032000 | 1200 | 320 | 150 | 22 | DN150 | DN125 |
SWDL -T-1500 | 380 | 1290000 | 1500 | 320 | 160 | 45 | DN150 | DN150 |
SWDL -T-2000 | 380 | 1720000 | 2000 | 320 | 200 | 55 | DN150 | DN150 |
SWDL -T-2500 | 380 | 2150000 | 2500 | 320 | 200 | 55 | DN150 | DN150 |
SWDL -T-4000 | 380 | 3440000 | 4000 | 320 | 360 | 110 | DN200 | DN200 |
Note: The table only lists a partial range of models. Electrical power can be combined in series through two or three-way connections, or customized according to customer requirements.
Four: Application Range of Thermal Oil Furnaces:
Petroleum & Chemical Industry: polymerization, condensation, distillation, melting, dehydration, forced insulation.
Fats and Oils Industry: Reaction kettle temperature control for fatty acid distillation, oil decomposition, concentration, esterification, vacuum deodorization, and reaction kettle heating.
Synthetic Fiber Industry: polymerization, melting, spinning, stretching, drying.
Textile dyeing process: heat-setting roller heating, oven heating, heat-set dyeing.
Nonwoven Industry: Nonwoven Fabric. Feed Industry: Drying.
Plastic and rubber industry: Hot pressing, rolling, extrusion, and vulcanization molding.
Paper Industry: Drying, corrugated paper processing.
V. Features of Thermal Oil Furnace:
1. Features low pressure, high temperature, safety, and energy-efficient performance.
2. Equipped with complete operation control and safety monitoring devices, it can precisely control the working temperature.
3. Reasonably structured, complete with accessories, short installation cycle, easy operation and maintenance, and convenient for boiler layout.
4. The electrically heated organic heat carrier boiler, with its advanced explosion-proof structure, is suitable for explosion-proof application in Factory Zone II and can achieve an explosion-proof grade of C.
（Thermal oil furnaceProducts can be customized according to customer requirements, including providing drawings, voltage, power, and dimensions.
