Step Grate Cleaning Machine

Installation Steps for Step Grating Cleaning Machine:
1. When installing the stepped grate cleaner, ensure the base foundation layout is level at 180 degrees; the contact area between the base and the foundation layout should reach 90%; the axis should be perpendicular to the horizontal plane measured on the weir; and it should be perpendicular to the hinge holes of the weir plate to prevent the screw from tilting, which could cause localized stress and damage the machine parts.
2. The foundation for installation must be firm. The concrete for the machine base and foundation components shall be cast according to the drawings. Temporary supports for the stepped grate cleaner shall not be removed or altered before the concrete reaches the designed strength, and trial adjustments or trial operations are not permitted.
3. The electrical equipment of the product is installed in accordance with the drawings and specifications, and all electrical equipment is securely grounded.
4. After the product is installed, clean the machine, repair any damaged protective paint, and apply lubricant.