Fully Automatic Softening Water Equipment

Maintenance of soft water equipment
1. Ensure stable input voltage and current. Prevent dampness and water immersion. Prevent the formation of salt bridges on salt valves.
② Regularly add solid granular table salt to the salt box (strictly prohibit adding refined salt or iodized salt), ensuring the salt solution inside the box remains supersaturated. When adding salt, be cautious not to sprinkle the granular salt into the salt well, which could block the salt intake lines. Since solid granular salt contains a certain amount of impurities, a large quantity can settle at the bottom of the salt box, blocking the salt valve. Therefore, it is necessary to regularly clean the impurities from the bottom of the salt box. To clean, open the drain valve at the bottom of the salt box and flush with clean water until no impurities are flowing out. The cleaning cycle of the salt box should be determined based on the impurity content of the solid granular salt.
Regularly inspect the airtightness of the jet pump and salt intake pipeline.
④ The softener should be disassembled annually. Check the resin wear and exchange capacity, replace severely aged resin, and use hydrochloric acid solution to revive resin affected by iron poisoning.