DZYBeltVacuumPressure FilterMachine
Equipment Introduction
DZYBeltVacuumPressure FiltrationMachineThe filter belt serves as the filtering medium, fully utilizing the gravity and vacuum suction of the material.SA separator equipment that achieves solid-liquid separation through the pressure of the forming roller. Utilizes an integral, removable filter disk as the vacuum chamber.SThe mold squeezing roller acts as an external force, while the filter belt operates continuously under the motor's drive. At the start of the filtering process, the filter disk runs synchronously with the filter belt in a vacuum state, and in a non-vacuum state, the filter disk runs relatively to the filter cloth.
Technical Features:
(1)Modular design for easy transportation, disassembly, installation, maintenance, and care;
(2)Filter cloth alignment utilizes double-acting cylinder with serpentine alignment, automatically adjusting the filter cloth offset.;
(3)The filter cloth tension is achieved using a gravity slider tensioning and limiting device, automatically adjusting the tightness of the filter cloth.
(4)Anti-wrinkle display fabric spiral roller for accessories, extends the service life of filter cloth.
(5)Speed adjustable, can be selected according to material parametersPlease provide the Chinese content you would like translated into American English.Excellent running speed.
(6)Filter cloth cleaning utilizes a rotating nozzle for continuous online cleaning to prevent clogging.
(7)The control box offers remote and on-site dual control, featuring simple and convenient operation with monitoring and alarm functions.
(8)For various materials, both upstream and downstream washing can be achieved, reducing water consumption and easing environmental pressure.
(9) Vacuum filter and pressing combined to reduce the moisture content of the filter cake.
WorkPrinciple
Material is evenly distributed on the filter belt of the vacuum filter disk by the slurry distributor. The slurry on the filter belt is drawn through under the vacuum suction until the vacuum filter disk reaches the proximity switch position. The filter cake on the lower filter belt continues to run and enter under the traction of the motor.SForm extrusion roller and filter belt both above as material entersSAfter the mold compression roller, the material is compressed to reduce the moisture content of the filter cake. The filter cake, after filtration, washing, re-filtration, and compression, is stripped and removed by a scraper device. The filter cloth, after being cleaned by an automatic regeneration unit, passes through a set of supporting rollers and a deviation correction device to re-enter the filtration area. The filtrate from the collection tank is discharged as the filter plate returns, and the filtrate in the compression roller flows into the collection dish. Through this continuous cycle of filtration, washing, re-filtration, and compression, the separation of solid and liquid is achieved.
Industry Application
Technical Specifications:Technical parameters
