One, Cangzhou Fangzheng Weighing Equipment's developed car hydraulic flip-top unloading device can unload materials such as sandstone, rare earth, scrap steel, wood chips, plastic, grain, coal powder, etc. It is a modern material unloading equipment that can automatically unload materials directly upon reversing onto it. Everything is fine, saving time, effort, and money, with high speed, efficiency, safety, and reliability; with a high unloading efficiency and minimal dust. This equipment is suitable for ports, various warehouses, resource recycling, scrap steel power plants, processing plants for automatic unloading of bulk materials; and is also widely used in chemical, metallurgical, mining, and any units and departments with bulk material receiving operations. Cangzhou Fangzheng Weighing Equipment can manufacture 300-ton capacity automatic flip-top unloading machines.
Section II: Features of Hydraulic Flip Plate:
1. Flip Platform Structure: Features a six-steel beam composite design; high rigidity; upgraded from traditional Q235 to alloy material Q345. Will not deform during the lifting process.
2. Within a certain range, the inclination angle can be arbitrarily set and adjusted by the operator.
3. Equipped with multiple locking wheel nuts, suitable for any car model, semi-trailers, front four and rear eight, high-sided trailers, etc.
4. Special lifting devices ensure lifting power, enhance equipment stability, and ensure safe and reliable operation.
5. Equipped with a synchronous detection system for real-time correction. Precision of 1mm. Ensures smooth up and down movement during unloading. If the set value is exceeded, the system will automatically lock and alarm, displaying the fault reason to prevent any accidents.
6. Pipeline Burst Protection System: In the event of extreme conditions during production (such as external damage and bursting of the pipeline), this system will automatically activate to stop the hydraulic flap, preventing sudden uncontrolled descent.
7. Power Failure Protection System: Equipped with a manual safe descent system. The platform can be safely lowered even during power outages.
Three, the side-supported rear unloading vehicle machine is a type of bulk material handling equipment for vehicles, widely used by units and departments in industries such as chemicals, steel, grain and oil, feed, coal, and cement, which have operations for accepting bulk materials. It includes two types: conventional angle rear unloading vehicle machines and high-angle rear unloading vehicle machines. The high-angle rear unloading is used for bulk materials with poor self-flowing properties, such as coal, ore, and cement. The conventional angle rear unloading is commonly used for bulk materials with good self-flowing properties, such as grain and oil, feed, water, chemicals, and coal.
1. The large-angle rear unloading machine can reach an unloading angle of 60 degrees, suitable for difficult-to-unload materials like ore with poor particle distribution and high moisture content.
2. The hydraulic cylinders use imported models with few failures and long service life; the main components of the hydraulic system (pumps, valves, seals) are selected from imported products, and all hydraulic systems and components are cleaned and inspected before assembly. They operate stably without clogging or oil leakage over the long term.
3. Entirely PLC-controlled with remote operation, offering simple, safe, and reliable handling.
Phone Number: 13931720511
