1、 The hydraulic flip plate unloading device for automobiles developed by Cangzhou Fangzheng Weighing Instrument can unload materials such as sand, rare earths, scrap steel, wood chips, plastics, grains, coal powder, etc. It is a modern material unloading equipment that can automatically unload materials directly as long as you reverse up. Everything is okay, saving time, effort, and money. It is high-speed, efficient, safe, and reliable; The unloading efficiency is high and there is also less dust. This device is suitable for automatic unloading of bulk materials in ports, various warehouses, resource recycling, scrap steel power plants, and processing plants; It is also widely used in chemical, metallurgical, mining, and all units and departments that receive bulk materials. Cangzhou Fangzheng Weighing Instrument Co., Ltd. is capable of manufacturing automatic dump truck with a large load-bearing capacity of 300 tons.

2、 Characteristics of hydraulic flipper:

1. Flip platform structure: adopting a six steel beam combination design; Strong rigidity; Upgraded from traditional Q235 to alloy material Q345, it will not deform during the lifting process;  

2. Within a certain range, the tilt angle can be arbitrarily set and adjusted by the operator;  

3. Adopting multiple sets of gear shifters, suitable for any type of car, semi-trailer, front four rear eight, high rail, etc;  

4. The special lifting device ensures the lifting force, improves the stability of the equipment, and ensures the safe and reliable operation of the equipment;  

5. Equipped with a synchronous detection system for real-time correction. Accuracy of 1 millimeter Ensure smooth up and down movement during the unloading process. Once the set value is exceeded, the system will automatically lock and alarm, and display the cause of the fault to ensure that no accidents occur.

6. Pipeline explosion protection system: In case of extreme situations during the production process (such as pipeline external damage and explosion), this system will automatically protect the hydraulic flap from sudden loss of control and descent.          

7. Power outage protection system: A manual safety descent system has been designed. The platform can be safely lowered even in the event of a power outage.

3、 The two side support rear dump truck is a type of automobile bulk material loading and unloading device, widely used in industries such as chemical, steel, grain and oil, feed, coal, cement, etc., where units and departments accept bulk materials for operation. There are two types of dump trucks: conventional angle dump trucks and large angle dump trucks. Large angle dump trucks are used for unloading bulk materials with poor self sliding properties such as coal, ore, and cement. Conventional angle dump trucks are commonly used for unloading bulk materials with good self sliding properties, such as grain and oil, feed water, chemical, coal, etc.

1. The large angle rear dump truck can unload up to 60 degrees, making it suitable for difficult to unload ores with poor scattering and high moisture content

2. The oil cylinder adopts imported technology with fewer faults and a long service life; The main components of the hydraulic system (pumps, valves, seals) are selected from imported products, and all hydraulic systems and components undergo equipment cleaning and testing before assembly. Long term use without blockage, oil leakage, and stable operation

3. The overall system adopts PLC and remote control operation, which is simple, safe, and reliable to operate.

4. Contact phone number: 13931720511