One, Cangzhou Fangzheng Weighing Equipment's developed car hydraulic flip-top unloading device can unload: sand and stone, rare earth, scrap steel, wood chips, plastic, grain, coal powder, etc. It is a modern material unloading equipment that can automatically unload materials directly after reversing onto it. Everything is fine, saving time, effort, and money; high-speed, efficient, safe, and reliable; with high unloading efficiency and minimal dust. This equipment is suitable for ports, various warehouses, resource recycling, scrap steel power plants, processing plants for automatic unloading of bulk materials; and is also widely used in chemical, metallurgical, mining, and any units and departments that handle bulk material reception operations. Cangzhou Fangzheng Weighing Equipment can manufacture 300-ton capacity automatic flip-top unloading machines.
II. Features of Hydraulic Flip Plate:
1. Flip-plate platform structure: six-steel beam combination design; high rigidity; upgraded from traditional Q235 steel to alloy material Q345; no deformation during lifting process.
2. Within a certain range, the inclination angle can be set and adjusted at the operator's discretion.
3. Equipped with multiple wheel lockers, suitable for any model of car, semi-trailers, front four and rear eight, high-sided trailers, etc.
4. Special lifting devices ensure lifting force, enhance equipment stability, and ensure the safety and reliability of equipment operation.
5. Equipped with a synchronous detection system for real-time correction. Precision of 1mm. Ensures smooth up and down movement during unloading. If the set value is exceeded, the system will automatically lock and alarm, displaying the cause of the fault, ensuring no accidents occur.
6. Pipeline Burst Protection System: In the event of extreme conditions during the production process (such as external damage and burst of the pipeline), this system will automatically protect the hydraulic flap to stop, preventing sudden uncontrolled descent.
7. Power Failure Protection System: Designed with a manual safe descent system. The platform can be safely lowered even during power outages.
Section 3: The side-supported rear-unloading vehicle machine is a type of car bulk loading and unloading equipment, widely used in units and departments that handle bulk material reception in industries such as chemicals, steel, grain and oil, feed, coal, and cement. It includes two types: conventional angle rear-unloading machines and high-angle rear-unloading machines. The high-angle rear-unloading is used for bulk materials with poor self-flowing properties like coal, ore, and cement. The conventional angle rear-unloading machines are commonly used for bulk materials with good self-flowing properties such as grain and oil, feed, chemicals, and coal.
1. The large-angle rear dump truck unloader can achieve a dumping angle of up to 60 degrees, making it suitable for difficult-to-unload materials such as poorly scattered, high-moisture content ores.
2. The hydraulic cylinders are imported with minimal failures and long service life; the main components of the hydraulic system (pumps, valves, seals) are selected from imported products, and all hydraulic systems and components are cleaned and inspected before assembly. Long-term use ensures no clogging, no oil leakage, and stable operation.
3. Fully PLC-controlled with remote operation, easy, safe, and reliable to use.
Phone Contact: 13931720511
