Pentair PENTAIR high-flow filter cores, used in wastewater treatment plant security filters, and seawater desalination RO reverse osmosis ultrafiltration units
The large flow filter element has a diameter of 170mm, with a single filter element having a filtration area exceeding 12 m². It boasts a larger filtration area and dirt-holding capacity, with a flow rate of up to 120 m³/h. This can significantly reduce the number of filter elements and the size of the filter housing, allowing the filtration system to achieve higher filtration flow rates while occupying less space. The flow direction is from outside to inside. Its wide chemical compatibility is suitable for various fields.
Product Features:
1. High-density folding for ultra-large filtration area
2. Increase the filtration area and dirt-holding capacity to prolong service life
3. Reduce the number of system filter cores, minimize the shell volume, and save costs.
4. Equipped with a PP frame, it is resistant to deformation and can withstand greater reverse pressure differences.
5. Deep filtration reduces maintenance and replacement time for the machine, resulting in lower operating costs.
Filter Media: Polypropylene
Filtering Area: ≥ 12 m²
Drainage Layer/Support Layer: Polypropylene
Inner Cavity/Terminal Cap/Connector Ring: Polypropylene
Filter Core Outer Diameter: 170mm
End cap outer diameter: 200mm
Filter Core Inner Diameter: 71.5mm
Sealing Size: 100mm
Length: 40" (1016mm) / 60" (1524mm)
Seal Materials: Silicone, EPDM
Filter Precision: 1μm, 5μm, 10μm, 15μm, 20μm, 50μm, 70μm, 100μm
Test Flow Rate: 40" 5 Micron ≥ 60m³/h
Operating Temperature: 82℃
.Working Pressure Difference: 0.38 MPa / 21℃ / 0.15 MPa 82℃
Recommended Pressure Difference: 2.4 bar / 20°C
High-flow filter element features
◆Permits high-flow media through filter media, featuring high efficiency, low pressure loss, and long service life.
◆ The external-in, internal-out structure of the high-flow filter element ensures easy replacement and keeps contaminants trapped on the outer surface of the filter element.
The filter core is internally reinforced with a PP support frame, capable of withstanding a pressure difference of 0.245 MPa.
◆ The β value of the filter core exceeds 1000.
◆ The filter housing can accommodate multiple filter cores, offering a wide range of flow rates suitable for both start-up and continuous operation.
◆ Filter cores are durable and can be configured with filters that are both cost-effective and economical.
Filter Core Specifications:
Nominal Length (mm/in): 1500/60
Diameter (mm/in): 171/6.75
Material: Polypropylene
Filter Precision: 0.6-70μ
Recommended Pressure Difference (bar): 2.5
Seals: EPDM, Viton
Temperature (℉/℃): 180/80
Model: ALPF-60006, ALPF-60020, ALPF-60050, ALPF-60100, ALPF-60200, ALPF-60400, ALPF-60700
PENTAIR high-flow filter cores, used in wastewater treatment plant security filters and seawater desalination RO reverse osmosis ultrafiltration units
