Water-based industrial coatings are self-compounded epoxy-modified waterborne resins through special processes. This product is a baked paint composed of waterborne resins, pigments, fillers, additives, and water, blended with the base resin.
Key Features
The product's coating achieves a decorative effect resembling aluminum-plastic panels, featuring excellent metallic texture and sheen; superior light and color retention; the coating is resilient, impact-resistant, and has good wear resistance, as well as scratch resistance; it exhibits excellent resistance to acids, alkalis, various chemicals, and salt mist; high hardness and good adhesion. The VOC residue in the paint film passes European environmental tests, making it popular among exporting companies.
Application Scope
This paint is suitable for vehicles, metal packaging, especially for various hardware or metal accessories with high requirements for appearance performance.
Usage Instructions
Before painting, thoroughly mix the paint liquid, dilute it with deionized water or clean tap water to a 4-cup consistency for application that takes 40 to 50 seconds. The dilution rate is 0 to 10%.
2. This product can be applied using various coating methods such as brushing, rolling, spraying, and dipping. The film thickness should be around 15~25um per coat (drying time of the paint film may be extended if the application temperature is too low or humidity is too high).
3. The wet film should be dried at room temperature for 15~30 minutes or pre-baked at 80℃ for 15 minutes before high-temperature baking to prevent the film from bubbling.
Theoretical Coating Area: 12-15 square meters per kilogram
Storage and Transportation
1. Store in a cool, dry, and well-ventilated area at room temperature. Seal and store for up to 6 months; if the product passes standard testing after the expiration, it is still usable.
2. Avoid collisions and exposure to sunlight and rain during storage and transportation. Effective anti-freezing measures should be taken when the temperature is below 0°C.
Notice: 1. Hunan Deqian advises against mixing this product with paints from other brands.
2. Due to the gradual decrease in pH value during storage (normal pH=8.0-10.0), uneven dissolution or a decrease in viscosity observed during stirring is a normal occurrence. Simply add an appropriate neutralizer while stirring until well blended, and it can still be used normally.
