6-S Shaking Bed Overview
The 6-S Shaking Table is one of the main gravity separation equipment, widely used for separating tungsten, tin, tantalum, niobium, iron, manganese, chromium, titanium, bismuth, lead, gold, and other rare and precious metal ores, as well as coal. The 6-S Shaking Table can be used for roughing, cleaning, and scavenging operations, separating coarse sand (2-0.5mm), fine sand (0.5-0.074mm), and mud (-0.074) of different particle sizes. It can also be used for separating iron, manganese ores, and coal. When processing tungsten, tin ores, etc., the effective recovery particle size range of the shaking table is 2-0.022mm.
The ore dressing process of the shaker bed is conducted on an inclined bed surface with riffles. The ore particle group is fed into the bed from the feed trough at the top of the bed, while water is supplied for lateral flushing from the water trough. Under the influence of gravity, the force of lateral water flow, the reciprocating and asymmetric motion of the bed surface, as well as the inertia and friction, the ore particles are separated by specific gravity and particle size, and move longitudinally along the bed surface and laterally along the inclined bed surface. Consequently, ore particles with different specific gravities and particle sizes gradually flow in a fan shape from the A side to the B side along their respective movement directions, and are discharged from different zones at the concentrate end and tailings side. They are then separated into concentrate, middlings, and tailings.
6-S Shaking Table Glass Reinforced Plastic (GRP) has high ore ratio, high separation efficiency, easy to manage, and easy to adjust stroke. The bed surface can maintain operation balance even when changing the lateral slope and stroke. Springs are placed inside the box, the structure is compact, and both concentrate and tailings can be sequentially obtained.
6-S Shaking Bed Advantages and Features
1. High recovery rate, high enrichment ratio.
2. Easy to install, simple to operate;
3 Fiberglass bed surfaces, available in seven different styles.
4 Long service life.
6-S Shaking Bed Main Technical Parameters Table
Model 6-S 7.6 6-S 4.08 6-S 1.95 6-S 0.5 Bed Surface Type Coarse sand bed surface Fine sand bed surface Mud bed surface Three mattress options available Bed surface ore dressing area (m2) 7.6 7.6 7.6 4.08 1.95 0.5 Bed Surface Dimensions Length (mm) 4500 4500 4500 3000 2100 1100 Transmission End Width (mm) 1850 1850 1850 1320 1050 500 Refined ore width (mm) 1550 1550 1550 1100 850 430 Particle Size for Mining(mm) 2 0.5 0.074 Ore concentrate-2 Slime-0.1 Ore concentrate-2 Mineral Sludge-0.074 Ore concentrate-2 Slime-0.074 Processing Capacity (t/h) 1-1.2 0.5-1 0.3-0.5 0.4-1.5 0.3-0.8 0.05-0.2 Mineral Concentration (%) 20-30 18-25 15-20 10-30 Stroke (mm) 16-22 11-16 8-16 6-30 12-28 9-17 Piston stroke (r/min) 220 250 280 210-320 250-450 280-460 Water Consumption (t/h) 0.7-1 0.4-0.7 0.4-0.7 0.3-1.5 0.2-1 0.1-0.5 Groove cross-sectional shape Rectangular Ripple wave Triangle Rectangular, sawtooth, and triangular waveforms available Motor Power (Kw) 1.1 1.1 1.1 1.1 1.1 0.55 Based on the varying feed positions of the ore, shakers can be categorized into two types: right-hand shakers and left-hand shakers. The feed position of the right-hand shaker is on the right side for the shaking mechanism, while the left-hand shaker has the feed position on the left side.
