Product Parameters Comparison Chart

                                           Manufacturer's Visual Overview - Case Introduction

Automated assembly line operation

                     Tote usage and maintenance precautions

The section details the precautions required during actual operation to ensure long-term and safe use of plastic pallets, strictly prohibits any unauthorized operation, and hopes that the user complies with the following instructions for correct usage:

Plastic pallets should be kept away from direct sunlight to prevent aging and extend their service life.

b. Absolutely prohibit dropping goods from heights onto plastic trays. Reasonably determine the stacking method of goods on the trays. Place goods evenly, avoiding concentrated stacking or eccentric stacking.

c. Strictly prohibit dropping plastic pallets from heights or throwing them upwards from a low position to avoid breaking or cracking due to severe impacts.

d. During the use of forklifts and hydraulic trucks with pallets, the distance between the fork tines should be widened as much as possible to the outer edge of the pallet's fork entry. The fork depth should be greater than 2/3 of the entire pallet depth. In actual operation, maintain a steady speed for advancing, reversing, and lifting, to avoid abrupt stops or turns that could damage the pallet or cause cargo to topple. The fork tines should not strike the side of the pallet to prevent cracking or breaking.

When stacking on pallets, ensure the goods are arranged flat to distribute the load evenly on the bottom of the pallet, preventing excessive deformation and potential cracking. When placing the pallet on the shelf, keep the pallet level on the shelf beam, and the length of the pallet should be at least 50mm longer than the outer diameter of the shelf beam.

2. Pallet storage environment and usage conditions

Users must comply with laws and regulations related to safe production and ensure product quality. Unauthorized operations are strictly prohibited during actual operation. To ensure long-term and safe use of plastic pallets, it is requested that plastic pallets be stored and used correctly according to the following requirements:

1. Plastic pallets should be kept out of direct sunlight to prevent aging and extend their service life.

2. Absolutely no dropping goods from heights onto plastic trays. Properly determine the stacking method of goods on the trays. Place goods evenly, avoiding concentrated stacking or eccentric placement.

3. Absolutely no dropping plastic pallets from heights or throwing them from low to high, to prevent breakage or cracking due to severe impact.

4. The steel pipe plastic pallets should be used in a dry environment.