Product Parameters Comparison Chart

                                           Manufacturer's Visual Overview - Case Introduction

Automated assembly line operations

                     Pallet Usage and Maintenance Tips

Section details the necessary precautions to ensure long-term and safe use of plastic pallets during actual operation. Strictly prohibits unauthorized operations. We hope the user will properly operate and use the following requirements:

Plastic pallets should be kept out of direct sunlight to prevent aging and extend their service life.

b. Absolutely prohibited from dropping goods from heights onto plastic trays. Reasonably determine the stacking method of goods on the trays. Place goods evenly; avoid concentrating them or stacking them off-center.

c. Strictly prohibit dropping plastic pallets from heights or throwing them from low to high, to avoid breakage or cracking due to violent impacts.

d. During the use of forklifts and hydraulic trucks with pallets, the distance between the forks should be widened as much as possible to the outer edge of the pallet's fork entry. The fork insertion depth should be more than 2/3 of the entire pallet depth. In actual operation, maintain a consistent speed for advancing, retreating, and lifting/lowering to avoid sudden stops or turns that could damage the pallet or cause goods to topple. Do not allow the forks to strike the side of the pallet to prevent breakage or cracking.

e. When stacking on a pallet, ensure the goods are evenly placed to distribute the weight evenly across the pallet's bottom surface, thereby preventing excessive deformation and potential cracking. When placing the pallet on the shelf, the pallet should be placed flat on the shelf beam, and its length should be at least 50mm longer than the outer diameter of the shelf beam.

2. Storage environment and usage conditions for the pallet

Users must comply with laws and regulations related to safe production and ensure product quality. Unauthorized operations are strictly prohibited during actual operation. To ensure long-term and safe use of plastic pallets, it is requested that plastic pallets be stored and used correctly according to the following requirements:

Plastic pallets should be kept out of direct sunlight to prevent plastic aging and extend their service life.

2. Absolutely no dropping goods from heights onto plastic trays. Reasonably determine the stacking method of goods on the trays. Place goods evenly, avoid heaping in one area, and prevent off-center stacking.

3. Absolutely no dropping plastic pallets from heights or throwing them from low to high, to prevent breakage or cracking due to impact.

4. Steel pipe plastic trays should be used in a dry environment.