Plasma+TIG dual welding torch technology
Automatic TIG Welding Gun ALL-27
● Maximum welding current: 500A, 60% duty cycle
●The torch body is designed with an all-water-cooled system
● Tungsten electrode diameter range: 3.2/4.0mm, length: 150mm
● Pre-set tungsten electrode nozzle extension length
● Tungsten electrode replacement time is extremely short.
● Welding gun cables are equipped with full-sealed insulation protection
● Optional Gas Cover
TIG arc oscillation
WXP-500 Plasma Welding Torch
● Compact Welding Gun Structure
● 500A, Load Rate: 60%
● Electrode: Standard length 150mm, diameter from 4.0mm to 4.8mm
Easy to replace and adjust
Auto-alignment
● Plasma Nozzle Diameter (mm)
2.5"-3.0"-3.5"-4.0" cylindrical nozzles
● Insulating and water-cooled protective gas nozzle
● The welding torch can be equipped with a gas shield to enhance protection, especially for improving weld quality during stainless steel and titanium alloy welding.
●The automatic welding torch is a critical component for plasma welding, specifically designed for small hole plasma welding.
● The material of our welding torch and the shape and size of its nozzle are the result of years of meticulous research; they ensure the quality of plasma welding and the longevity of consumables.
Automatic Arc Voltage Tracker (AVC)
● A variable speed plate is located within the mechanical components of the Nertamatic power supply, including the following parts:
An electric slider with a stroke of 80mm
A middle connecting block for a fixed welding torch.
A 360° rotating locking block
A manual slider with a stroke of 50mm
Technical Features
Automatic tracking travel 80mm
Welding gun with 50mm front and rear travel adjustment
Voltage Range for Monitoring: 5-50V
Speed accuracy of the electric slider ±1%
Voltage Tracking Accuracy ±0.1V
Highest electric slider speed: 250 cm/min
Drive Unit - Closed-loop Feedback DC Servo System
Automatic Spooling System
● Often, filling material is required during the welding process.
Prevent weld indentation and undercut
● Offer low-carbon steel and anti-oxidation elements
● Enhanced Weld Strength
● Surface Hardening Treatment
● A variable speed plate is located within the mechanical components of the TRANSMIG 550i power supply, including the following parts:
A support shaft
A Φ300, 15Kg silk feeding disk protective cover
A set of silk-reeling deceleration unit
A 3-meter-long silk feeding conduit
A wire feed position adjustment device
A welding torch, bracket
● Technical Features
Driving Method: Four-Wheel Filament Delivery
Drive System: Closed-loop Feedback DC Servo System
Spooling Speed: 0-10 m/min
Speed Control Accuracy ±1%
Standard steel welding wire diameter: Φ1.0-1.2mm
Φ0.8, 1.6mm are optional items.
