SRL type finned heat exchanger

Product Overview
The SRL finned tube radiator can effectively perform its cooling function during use, which is inseparable from the mutual coordination of its accessories. Below, let's specifically discuss the accessories required for the installation of the finned tube radiator.
1. Bleeder: The bleeder is an essential component of the radiator, primarily used for venting air from the radiator. During the heating season, gases can accumulate in the heating system, and if not released, they can obstruct the normal operation of hot water, affecting the overall heat dissipation function of the heating system.
2. Threaded plug: Generally used at the end of radiators, the threaded plug serves as a sealing function, allowing hot water to flow inside without any leakage issues. Structurally, the threaded plug is a commonly used accessory in the hydronic system, subjected to high system pressure and prone to corrosion. It must withstand the physical stresses of thermal expansion and contraction, including the risk of cracking and leaking.
3.胀钉andhangers: These radiator accessories are used to secure radiators to walls. Our products differ significantly from traditional radiators, as they are typically hung directly on the wall without the need for additional heating covers. The胀钉ensure the radiator remains stable and does not shift or vibrate.
The mutual coordination between accessories is crucial for the SRL type finned tube radiator, ensuring its normal stable operation and effective heat dissipation.

SRL finned tube radiators have the following heat transfer coefficient and resistance: see the table below

Key Technical Parameters