Sediment Separator Manufacturer
Sand and Water Separation Device Manufacturer
Duwan Environmental LSSF-320 Sand and Water Separator Quotation
Jiangsu Du'an Environmental ProtectionOrder Requirements for Spiral Sand and Water Separator
1Write the full name in accordance with the model notation.
2Application Environment (indoor, outdoor, and others)
3If reinforced concrete water tanks are used, provide engineering design documents for the relevant sections.
WorkFeatures:
1The sedimentation and sand conveyance units of the sand-water separator are a sealed, integrated structure featuring compact design, light weight, high operational reliability, and minimal maintenance requirements.
2Sand and water separator with separation efficiency up to96%～98%May be separated into particles ≥0.2nnGrains, with a recovery rate not less than98%Please provide the Chinese content to be translated.0.1mmThe sand and gravel removal rate is not less than80%。
3Under normal circumstances, the performance of the sand separator pump is matched with the pump-type sand sink and sand storage. It can also run continuously when necessary.
4The shell, bracket, sand conveyor, and other critical components of the sand and water separator are made of stainless steel.UThe conveying spiral inside the mold is of a shaftless spiral design, ensuring material flow without blockages; the shaftless spiral has sufficient strength and rigidity to guaranteezuiUnder heavy working loads, it will not be affected, causing deformation or elongation.
5Axleless spiral bearing with waterproof, dustproof, wear-resistant, and self-lubricating features.
6The separation pool of the sand-water separator is made of stainless steel with precision welding, featuring a semicircular bottom to support the spiral conveyor. The inlet and overflow pipe are installed at the top of the container, while the drain pipe is positioned at the bottom for easy maintenance. All pipe fittings and flanges are made of stainless steel.
7The design of the sand-water separator's inlet and outlet pipe diameters prevents clogging by debris in the water.
8The sand and water sharing machine and auxiliary parts are configured to meet the requirements for both continuous and intermittent operations.
9、UThe type features replaceable liners in its helical grooves, offering a simple structure, long service life, and ease of replacement.
10There are no high-speed rotating parts in the equipment, resulting in low screw wear and minimal need for maintenance.
11The drive unit employs an shaft-mounted reducer, with the output shaft directly connected to the helical device.
Jiangsu Du'an Environmental ProtectionLSSFSand and water separator accessory siteControl cabinet operating conditions
Power Supply: Mains power, self-provided grid, diesel generator set; three-phase AC380V,（-10%，+15%),50HZ
Applicable Motors: General squirrel-cage induction motors
Start-up Frequency: Can be started frequently; it is recommended not to exceed more than once per hour.20Next
Ingress Protection Rating:IP41OrIP20
Environmental Conditions: Altitude not exceeding2000Meters (over)2000Please use rice with reduced capacity and ensure the environmental temperature is-25℃--- +40Between ℃, relative humidity not exceeding95%No exposed parts. Vibration less than0.5G
Common environmental protection equipment control cabinets include submersible mixers, aeration machines,格栅cleaning machines, scraper machines, vortex sand separators, sand-water separators, squeezing machines, decanters, spiral conveyors, crushers, and mud buckets, among others.
Jiangsu Du'an Environmental Protection Sand and Water Separator Technical Specifications and Installation Dimensions mainly include nominal helix diameter, helix diameter, processing capacity, installation angle, helix speed, motor power, recovery rate, water content after sand separation, and installation dimensions.
Duwan Environmental Sand and Water Separator SetStandard Control(Box)Cabinets feature manual, remote, and automatic control functions. Pre-allocated as per customer requirements.PLCInterfaceBAInterfaceDCSInterface, convenient for users to implement: remote control,PLC、DCSControl. Design and produce from one to one control according to customer requirements.NSpecial Requirement Control Cabinets (with valve interlock, dual power supply, capacitance compensation, etc.). Can implement multi-pump network control systems and various communication methods according to customer requirements, achieving remote control via computer networking. Series of level automatic detection devices include: simple float ball level switches and intelligent digital displays, as well as measurement and control systems composed of submersible transmitters or ultrasonic transmitters.
Two-year warranty
Provide on-site after-sales guidance for installation and debugging
