This series of products is mineral oil-based lubricants for pistons. They come in liquid, thickened form, with and without graphite. Primarily used for the lubrication of injection nozzles in pressure die casting. The product contains special polarizers and thixotropes, offering high-temperature lubricity. Suitable for sand and metal mold casting, it facilitates easy separation of castings from the mold and can adjust the solidification speed of the metal liquid within the mold, thereby extending the service life of the metal mold.

Appearance: Brown-black oil (HS-J02), brown oil (HS-J01)

Specific Gravity: 0.95 (HS-J02), 0.91 (HS-J01)

Flash Point: 290°C

Composition: Minerals, Graphite, Additives, etc. HS-J01 does not contain Graphite.

Key Features:

Enhance the high-temperature lubricity and service life of the punch, control the solidification speed of the metal liquid, improve the surface quality of castings, facilitate demolding, and reduce wear on the metal mold cavity.

Instructions for Use:

Shake well before use. Simply drip or brush directly onto the surface of the die or mold cavity.

Packaging:

20L per drum / 25L per drum / 200L per drum