PLC receiver with terminals outside the sealed box, easy wiring suitable for installation inside control cabinets and clean environments.


  The PLC receiver model is installed using a card guide and screw mounting.
Product Features
The remote control distance of model A1011/2011 reaches up to 200 meters (open, straight-line distance).

Full isolation design and frequency-modulated transmission technology adopted, significantly enhancing anti-interference capabilities.

The remote control supports 5 sets of switch quantity outputs and 1 set of speed analog quantity output.

Locking button specifically configured for enhanced safety.

The remote control panel is made of stainless steel, making it more suitable for welding environments.

Feedback function included, with a liquid crystal screen displaying both the switch state and the actual speed value simultaneously.

The remote control can be set to display the frequency range and speed unit according to the specific parameters of the equipment, as well as the speed range.

The remote control handheld unit is compact, featuring a push-button switch and a large rotary knob for speed adjustment, making it convenient for workers to operate with gloves on.

The remote control features a magnet on its back for easy attachment to the workpiece surface.

The receiver uses a terminal block for easier and simpler wiring.

The receiver supports DC5V and AC/DC 12-24V power supply.

Dimensions

The remote control handheld end shell size is:

Dimensions: 188mm (L) x 88mm (W) x 36mm (H); Component size: 205mm (L) x 88mm (W) x 55mm (H)

2. Enclosed box model remote receiver case dimensions:

Dimensions: 153mm x 90mm x 60mm, with component size: 165mm x 90mm x 60mm
3. The PLC remote receiver has dimensions: Length 115mm x Width 115mm (including terminal blocks) x Height 40mm

4. Remote Control handheld net weight: 350g (without battery); Enclosed box remote control receiver net weight: 350gThe weight of the PLC model remote receiver is: 230g

Electrical Features:

Handheld unit: Powered by 3 AA (5V) batteries.

Receiver: Powered by AC/DC 12-24V or DC 5V, with power over 10W. The relay has a load capacity of AC 220V 10A.