Pipe Installation Process

1. When refining asphalt, adhere to the relevant provisions under "Refining Oil" in this procedure.

2. When installing vertical pipes, an application must be submitted to the general contractor prior to opening the pre-drilled holes in the reinforcing mesh or safety cover plates. After the hole usage handover procedures are completed, the pipes can then be removed. Once the operation is finished, the safety cover plates over the pre-drilled holes should be properly restored and securely sealed.

3. Ventilation pipe installation cost when installing the cooling tower vertical pipe, flange of the last pipe connected to the top of the cooling tower*

The welding must be completed before connecting to the cooling tower's plastic flange. Prior to welding the vertical pipe, a fire permit must be applied for, and a designated person must be on duty to supervise the fire. Fire fighting equipment should be ready. The holes in the shaft should be sealed tightly with wet asbestos cloth soaked in water, and it is strictly forbidden for sparks to fall to the next level.

Ductwork is extensively used in our daily lives and is an indispensable component in many buildings today. The quotation for ductwork installation requires adherence to certain standards during manufacturing and installation to ensure problem-free operation in the future, thereby reducing the likelihood of malfunctions.

Points to note when installing pipes

1. The manufacture and installation of ductwork shall be carried out in accordance with the design drawings, contract, and relevant technical standards. Any changes must be accompanied by a design or contract amendment notice or technical approval visa.

2. Prior to the construction of the duct system, the contractor must coordinate with the owner, supervisor, general contractor, and design team. Check the positioning and direction of the ducts and other pipelines, Nantong ventilation duct installation, and inspect the installation of reserved holes. Construction should be coordinated with civil engineering works and other specialized trades.

Suzhou Shunze Tong Electrical and Mechanical Installation Co., Ltd. specializes in the installation of various pipelines and equipment. In recent years, we have assisted the environmental protection industry in completing over two hundred pollution control projects, including wastewater and waste gas treatment, as well as soil remediation, earning high praise from our clients. We have also established long-term cooperative agreements with them. Our company undertakes the installation and long-term maintenance of pipelines, electrical systems, and equipment for various factories and has become a preferred supplier for several foreign enterprises. Over the years, we have accumulated a client base and earned a good reputation.

Pipe installation process

1. Pipes should be installed in ditches or wet areas, with lighting voltage not exceeding 12V. Strictly prohibited is exposing and damaging welding wires. Operators must wear insulated shoes and insulated (welding) gloves.

2. When pipes are tied and matched, the movements should be coordinated; hands should not be placed at the openings or joints of the pipes.

3. Installation of outdoor heating pipelines and earthwork for pipeline trenches shall comply with the relevant provisions of these regulations.

Ventilation Pipe Installation Project - Shunze Tong Electrical and Mechanical Installation Co., Ltd. Nantong Ventilation Pipe Installation is provided by Suzhou Shunze Tong Electrical and Mechanical Installation Co., Ltd. With impressive capabilities and reliable reputation, Shunze Tong Electrical and Mechanical Installation Co., Ltd. has accumulated a large number of loyal customers in the industrial maintenance and installation industries in Jiangsu, Suzhou. Shunze Tong Electrical and Mechanical Installation, with a meticulous work attitude and a commitment to continuous improvement and innovation, joins hands with you to step into brilliance and create a wonderful future together!