Product Features
A one-component plastic adhesive, primarily composed of high polymer resin and imported reinforced resin.
Easy to use, quick to locate, high bonding strength, room temperature curing, water and acid-base resistance, and maintains quality over long-term storage.
Exceptional waterproof, heat-resistant, cold-resistant, oil-resistant, corrosion-resistant, transparent, and non-bloom properties.
Adhesives for PE, PP, PVC, ABS, PC, PS, nylon, films, foams, leather, etc., with good bonding properties on acrylics, rubber, metals, bamboo, wood, fabrics, and paper. Especially effective for bonding metals and non-metallic materials, as well as cross-adhesion.
Application Range
Widely used in industries such as home appliances, radio, speaker manufacturing, hardware, plastic products, decoration, craft toys, thermal insulation materials, packaging printing, etc.
Performance Specifications:
Appearance: Clear, thick liquid
Viscosity: 2000-3500 cps
Non-volatile matter: ≥90%
Shearing Strength: PP-PP ≥ 6 kg/cm², can reach PP-PP ≥ 10 kg/cm² after acid treatment.
Operating Temperature: -10 to +60℃
Temperature Resistance: -40 to +90℃
【Instructions for Use】
Surface Treatment: Ensure the adherend surface is clean, dry, free of oil stains, and dust-free.
Apply Adhesive: Apply the adhesive directly to the surface of the materials to be bonded, ensuring even coating on the bonding surfaces. It is mandatory to apply adhesive on both sides, with a thickness of 0.05-0.08mm. Allow to dry for 5-10 minutes until the solvent evaporates (not sticky to the touch). Ideally, after applying adhesive to the bonding surfaces, heat them (60-80 degrees Celsius) for 2-3 minutes before bonding. Press the surfaces together to ensure a tight contact. Remember to flatten the bonding surfaces and remove any air bubbles between them.
**[Important Notes]**
Use with good ventilation and prevent contact with open flame. Always cover the adhesive after use to prevent solvent evaporation; if the adhesive is too thick, dilute it with a thinner.
The above performance data are typical values measured under a laboratory environment of 25°C temperature and 70% humidity, and are for customer reference only. They do not guarantee all data achievable in a specific environment. Please refer to test data when using the product.
Packaging: 1kg/bottle, 5kg drum, 15kg drum
【Shelf Life】12 months; products that have expired can continue to be used after passing a test.