Product Features
One-component, neutral room temperature curing, non-toxic and non-corrosive.
Vibration-resistant, corona-resistant, leakage-proof insulation, aging-resistant, UV radiation-resistant, excellent moisture and water resistance.
Withstanding extreme temperatures, suitable for use in a range of -50℃ to 250℃.
Fast curing rate, excellent adhesion to glass, metal, PP, rubber, ABS and most plastics.
Application Scope
Bonding and fixation of electronic components, adhesive sealing for electrical appliances.
Inspection Parameters
| Serial Number | Inspection Items | Technical Requirements | Test Results/Actual Measurement Values |
| 1 | Appearance | Black or white, paste-like, free of impurities, smooth and fine surface | Meets specifications |
| 2 | Drying Time | Drying time: 8-15 minutes | 10 minutes |
| 3 | Hardness | HsA35±5, processed in accordance with GB/T531-1999 requirements, with a specimen thickness of not less than 6mm, test at six different locations, take the middle value | The average is 38HsA |
| 4 | Tensile Strength | Not less than 1.5 Mpa, tested according to GB/T 1040-92 testing method | 2.07Mpa |
| 5 | Tensile elongation at break | Not less than 200%, tested according to GB/T 1040-92 testing method | 320％ |
| 6 | Aging Test | Extrude the sealant, allow it to fully cure, then place it in an oven at 150°C for 15 minutes. Weathering aging test, require that after the test, the sealant cannot exhibit powdering or cracking. Elephant | Meets requirements |
| 7 | Thermal resistance | extrude the sealant, allow it to fully cure, then place it in an oven at 180°C for 48 hours. Baking, the sealant must not exhibit cracking, warping, or powdering. | Meets requirements |
| 8 | Water resistance | The fully cured sealant is to be immersed in hot water at 50℃ for 7 days and then sealed. No cracking, powdering, or softening of the adhesive allowed. | Meets requirements |
Usage Instructions and Precautions
The curing speed and surface drying time of sealant vary with temperature and humidity; within a certain range, the higher the temperature and humidity, the faster the curing speed.
This product absorbs moisture from the air and solidifies from the surface inward. Under 25°C and 55% relative humidity, it achieves a depth of solidification of 2-4 mm in 24 hours. If the adhesive layer is thicker or if the area is not easily exposed to air, the curing time will be extended.
Storage and Shelf Life
Store in a cool, dry place at 25°C; shelf life is 8 months.
Packaging Specifications
100ml per bottle; 100 bottles per carton.
300ml per bottle, 25 bottles per case
Other
This product is non-hazardous, but avoid ingestion and contact with eyes. Mild skin contact does not affect health.
This product releases aliphatic substances during the curing process, so proper ventilation in the workplace is essential.
Transportation: No regulations for domestic (CN-GB), international (IMO, IATA, UN), classified as non-hazardous goods.
Detailed safety information for the product is available in the Material Safety Data Sheet (MSDS) for that product.
