Product Features:
It is mainly composed of high-purity organic silicon oil, refined with defoaming agents, leveling agents, curing agents, and other high molecular materials.
2. User-friendly, suitable for both hand and mechanical glue application, offering great convenience for your operation.
3. Single-component, room temperature curing; enhances production efficiency and reduces costs; moisture and dust resistance; provides protection for electronic products.
4. Provides electrical insulation properties, ensuring safety for electronic products.
5. Vibration Resistance – After curing, it offers elasticity, ensuring superior quality protection during the use and transportation of electronic products.
6. Features UV, ozone, and chemical resistance, offering multiple safeguards for the stability of electronic products.
7. Solvent-free and environmentally safe, offering a secure and worry-free guarantee for users of electronic and electrical products.
Application Scope:
Sealant required for the bonding area.
2. Moisture and water-resistant encapsulation for exquisite electronic accessories.
3. Potting services for various instruments, electronic components, panels, etc.
4. Adhesives and seals for other metals and plastics.
5. Refrigerators, microwave ovens, circuit boards, electronic components, solar industry adhesive and sealant, as well as mechanical adhesive and sealant.
Performance specifications:

Important Notice: The above performance data is a typical set obtained under laboratory conditions of 25℃ temperature and 70% humidity, and is provided for customer reference only. It does not guarantee all data achievable in a specific environment. Please refer to test data for accuracy during use.
Usage Instructions:
Clean Surface: Thoroughly clean the surface of the item to be bonded or coated, removing rust, dust, and oil stains, etc.
Apply adhesive: Unscrew (or cut open) the adhesive tube cap, squeeze the adhesive onto the cleaned surface, ensuring even distribution, then clamp and secure the bonded surfaces together.
Curing: Place the assembled or sealed components in the air to allow for natural curing.
The curing process is from the surface to the interior, and within 24 hours (at room temperature and 55% relative humidity), the adhesive will cure to a depth of 2-4mm. If the glue application is deeper, especially in areas that are difficult to reach air, the full curing time will be extended. Lower temperatures will also prolong the curing time, with a 6mm thick sealant requiring more than 7 days for complete curing.
Cautionary Notes:
After completion, any unused glue should be immediately sealed with the cap and stored airtight. Upon reuse, if there's a bit of skin on the seal, simply remove it; it won't affect normal use.
During storage, a small amount of curing may occur at the tube opening, which can be removed without affecting product performance and can be used normally.
This product is non-toxic after complete curing, but avoid contact with eyes before curing. In case of contact, rinse with plenty of clean water.
Unsolidified products should be kept away from children; our products are for industrial use only and are not intended for implantation or injection into the human body.
Storage and Packaging:
This product should be stored in a cool and dry place with temperatures between -10 to 25°C, with a storage period of 6-8 months at temperatures below 25°C.
These products are non-hazardous and can be transported as general chemicals. Be cautious of leaks during transportation! Use products past their expiration date only after confirming there are no abnormalities.
100ml per bottle, 100 bottles per carton. 330ml per bottle, 25 bottles per carton.