Product Features:
A two-component epoxy adhesive made from imported raw materials and advanced process technology.
2. Non-volatile, low odor, environmentally friendly, and excellent insulating properties.
3. Solidified material is fire-resistant, oil-resistant, water-resistant, acid and alkali-resistant, wear-resistant, and has good corrosion resistance.
4. Room temperature curing, with long-term resistance to low temperatures down to -60°C and high temperatures up to 180°C to 250°C, and the ability to withstand temperatures above 280°C instantly.
Product Application:
Adhesives, potting, and repair services for equipment and machinery, power plants, mines, steel mills, transformers, electrical appliances, chemical pipelines, ceramics, electric motors, battery packaging, and mold manufacturing industries.
2. Not applicable to elastic or soft goods
Performance Parameters:
| Model | Colloidal color | Viscosity (CPS) （25℃） | Adjust adhesive Ratio | Operational Hours （25℃） | Curing Time （25℃） | Shearing Strength （Mpa） | Thermal Resistance (°C) | Shelf Life （25℃） | ||
| JD-8119 | Ash gray | 9000-10000 | 1:1 | 30 minutes | Initial Fixing 2 hours | ≥460 | -60 to +280 | 12 months | ||
| Gray | 9000-11000 | Fully cured 24/7 | ||||||||
| Model | Tensile strength | Breakdown Voltage | Volume Resistance | Shore hardness | Flame retardant | |||||
| JD-8119 | 22mpa | ≥22KV/mm | ≥1.010(15^th) Ω | ≥80 | FVO grade | |||||
Note: Due to variations in material, surface cleanliness, temperature differences, etc., the strength and curing speed may slightly differ. The data is for reference only.
Usage Instructions:
1. Handle and clean the surface of the materials to be bonded according to different materials during use.
2. Mix A and B components in the specified ratio, stir well, then thinly apply the mixture onto the substrate and gently press to adhere.
3. If the temperature is too low, heat the adhesive material.
4. The colloid will initially set in 1 hour, and achieve optimal results within 24 hours. Please conduct the product performance test after 48 hours of application to ensure the stability of the adhesive properties.
【Important Notes】
Keep the workplace well-ventilated and keep children away.
2. Please wear protective gloves during operation. In case of contact with skin or eyes, rinse immediately with clean water or seek medical attention.
3. Do not mix two adhesives when not in use, and do not cover the adhesive cap incorrectly after use.
Store in a cool, dry, well-ventilated area and keep away from heat.
5. When using in bulk by users, please conduct a trial first. Avoid affecting the bonding effect due to improper operation.
Packaging and Specifications
2KG per set, 24KG per case; 20KG per drum
