Cedar Kiln Drying Equipment, Drying Microwave Machine, JD-TU Series, 201 Stainless Steel Material

Sandalwood Drying Machine, Wood Drying Equipment, Microwave Drying Equipment, Guangdong Drying Equipment, Weiyasi Drying Equipment

WeiasWood Drying EquipmentUsed for rapid drying of cork with moisture content below 20% and partial hardwood with moisture content below 15%, with wood thickness less than 5 cm. Equipment power and length are customized according to the characteristics of the wood material and the cubic volume of drying. The drying time is controlled within 30 minutes, ensuring even drying, no cracking, and minimal deformation. The drying process also kills eggs and larvae inside the wood.

Special notice: This wood drying equipment is not suitable for drying fresh wood, as the drying time is prolonged and the cost is relatively high due to the moisture content exceeding 30%. Using this tunnel-type wood drying equipment requires multiple drying cycles, which is not very convenient unless for emergency use.

The rapid wood drying equipment produced by Weiyasi Company is only suitable for drying softwoods with moisture content below 20%. For hardwoods that are dense and prone to deformation, it is recommended to choose a vacuum wood drying machine. If the wood has a high moisture content, a wood drying kiln is suggested.
Vyas Wood Drying Equipment utilizes high-frequency electromagnetic waves to heat and dry wood. The advantages of the drying process include:

1. Directly radiating electromagnetic waves heat the wood, allowing the waves to penetrate the core and achieve simultaneous multi-layer heating of both the interior and exterior of the wood, thereby rapidly drying it.
2. Radiation power is adjustable, allowing for self-adjustment based on the wood material, drying quantity, and temperature. This enables control over the radiant flux absorbed by the heated wood, thereby solving the issue of uneven heating.
3. The equipment has low thermal inertia and heats up quickly, effectively saving energy.

Based on the above advantages, Waiyas' wood drying equipment is particularly suitable for drying products with poor thermal conductivity, low moisture content, and a need for rapid drying. Please call for more information.

Special Note: The Weias wood drying equipment is only suitable for small batch wood drying, less than 5 cubic meters per day, and the moisture content before drying must be less than 30%. Not applicable otherwise. For details, pleaseCall for Inquiry: Tel: 158-1718-8338Mr. Song.