THJF Fluorine-lined Centrifugal Pump for Petrochemical Process (API 610 Standard)_Wastewater Treatment Equipment_Machinery_Products_Zhongshang 114 Industry Resources Network

I. Product Introduction:

Model Significance	TTZE25-200
T	Company Code
TZE	Central support
25	Import diameter 25mm
200	Impeller nominal diameter: 200mm
Name:	TTZE Petrochemical Process Pumps / ZAO Petrochemical Process Centrifugal Pumps / Petrochemical Process Pumps / API610 Centrifugal Pumps / API682 Centrifugal Pumps / High-Temperature Centrifugal Pumps / Midline-Supported Centrifugal Pumps
Product Features:	Mid-line support, high-temperature resistance
Structural Form:	API 610, API 682 standards, horizontal, pump and motor coupling
Bore size:	25～400mm
Traffic:	5.5～2600m3/h
Head Lift:	16～250
RPM (Revolutions Per Minute)	1450/2900r/min
Operating Temperature:	-20～+450℃
Pressure Rating:	2.5Mpa、4.0Mpa、5.0Mpa
Power:	～400KW
Material:	304、304L、316、316L、2205、HC276

Product Overview:
TTZE chemical process pump, designed and manufactured in accordance with API 610 and VDMA 24297 specifications. The TTZE pump body is foot-supported. Single suction radial impeller, axial intake, radial discharge.
Based on operational conditions, hydraulic balance is achieved using front and rear mouth rings and a balancing hole. The stuffing box features cooling or heating pipe connections. The shaft seal is sealed with packing and can also utilize a single or double face mechanical seal. It is equipped with a cooling, flushing, or sealing fluid system.
Product Advantages:
The TTZE type chemical process pump is designed according to standard piping in compliance with API specifications. The impeller is available in three types: closed, semi-open, and open. It can handle clean, particulate, and slightly gaseous mediums. It is also capable of transporting high-temperature, low-temperature, and highly corrosive mediums. The impeller features balancing holes and corrosion-resistant rings to counteract axial forces.
The pump housing and bearing housing are connected by an intermediate connecting section. Depending on different working conditions, the intermediate connecting section can be made of different materials to prevent severe corrosion of the bearing housing and bearings when transporting highly corrosive media. Additionally, the intermediate connecting section features a water-cooling chamber that circulates cooling water, preventing high-temperature media from transferring high temperatures to the bearings.
Sealing options include packing, single or double-end mechanical seals, and integrated single-end mechanical seals. Depending on the specific situation and the user's requirements for cooling and flushing, seals can be selected from the API 682 design specification.
The bearing housing design features three cooling methods: air-cooled fins, fan-cooled, and water-cooled cavity, allowing users to select according to operational conditions. The bearing is lubricated by splash oil from the oil tank. The oil in the oil tank is cooled by the water in the water-cooled cavity, and the heat within the bearing is carried away by the cold water to ensure the bearing is always in normal working condition.
Performance Range:
Bore:25～400mm, Flow: 5.5～2600 m³/h, Head: 16～250m
Work Pressure:,5.0 MPa
Operating Temperature:-80℃～ +450℃

III. Performance Parameters Table:

RuleModel No.	Impeller Type	Traffic	Head Pressure	Efficiency	Bearings Housing	Erosion Margin	RPM	Specific Gravity = 1.00	Specific Gravity = 1.35	Specific Gravity = 1.84
		Q	H	η	LK	NPSH	n	Motor Power
		m3/h	m	%	LK	m	r/min	kw	kw	kw
TZE25-200	A	11.5	49	42	0	1.5	2900	5.5	7.5	11
	A	5.8	12	38		0.6	1450	1.1	1.1	1.5
	B	10.5	42	42		1.5	2900	4	5.5	7.5
	B	5.4	11	38		0.6	1450	1.1	1.1	1.1
	C	9	36	42		1.5	2900	3	4	5.5
	C	4.6	8.5	38		0.6	1450	1.1	1.1	1.1
	D	7.5	28	42		1.5	2900	2.2	3	4
	D	4	6.5	38		0.6	1450	1.1	1.1	1.1
	E	5.5	16	42		1.5	2900	1.5	1.5	2.2
	E	3	4	38		0.6	1450	1.1	1.1	1.1
TZE25-250	A	10.5	80	28	2	1.2	2900	11	15	18.5
	A	7.5	18	23	1	1	1450	2.2	3	4
	B	9.7	68	28	2	1.2	2900	7.5	11	15
	B	7	16	23	1	1	1450	2.2	3	4
	C	9	50	28	2	1.2	2900	5.5	11	15
	C	6.5	11.5	23	1	1	1450	2.2	2.2	3
	D	8.5	30	28	2	1.2	2900	5.5	11	15
	D	6	6.5	23	1	1	1450	1.1	1.5	2.2
TZE25-315	A	18.5	130	28	2	1.2	2900	30	45	55
	A	9.5	32	25		0.7	1450	5.5	7.5	11
	B	17.5	115	28		1.2	2900	30	37	45
	B	8.7	29	25		0.7	1450	4	5.5	7.5
	C	16	100	28		1.2	2900	22	30	45
	C	7.5	25	25		0.7	1450	3	4	5.5
	D	14	90	28		1.2	2900	18.5	30	37
	D	7	22	25		0.7	1450	3	4	5.5
	E	13	80	28		1.2	2900	18.5	22	30
	E	6.8	20	25		0.7	1450	3	4	5.5
	F	11.5	67	28		1.2	2900	15	18.5	30
	F	6	16	25		0.7	1450	2.2	3	4
TZE40-160	A	28	33	62	2	3	2900	5.5	7.5	11
	A	14	8	59	1	0.8	1450	1.1	1.1	1.5
	B	25.6	29	62	2	3	2900	5.5	7.5	11
	B	13	7	59	1	0.8	1450	1.1	1.1	1.5
	C	22	22	62	2	3	2900	4	5.5	5.5
	C	11	5.5	59	1	0.8	1450	1.1	1.1	1.1
	D	20	16	62	2	3	2900	2.2	3	4
	D	9.5	4.5	59	1	0.8	1450	1.1	1.1	1.1
TZE40-200	A	29	53	58	1	2.2	2900	11	15	18.5
	A	14.5	13	55	1	0.8	1450	1.5	2.2	3
	B	26	47	58	1	2.2	2900	7.5	11	15
	B	13	11.5	55	1	0.8	1450	1.1	1.5	3
	C	22	39	58	1	2.2	2900	5.5	7.5	11
	C	11.5	9	55	1	0.8	1450	1.1	1.1	1.5
	D	18	20	58	1	2.2	2900	4	5.5	7.5
	D	9.5	7	55	1	0.8	1450	1.1	1.1	1.1
TZE40-250	A	32	78	53	1	2.5	2900	18.5	22	30
	A	16	19.5	49.5	1	0.8	1450	3	4	5.5
	B	30	72	53	1	2.5	2900	15	18.5	30
	B	15	18	49.5	1	0.8	1450	2.2	3	4
	C	24	60	53	1	2.5	2900	11	15	18.5
	C	12.5	14	49.5	1	0.8	1450	1.5	2.2	3
	D	21	47	53	1	2.5	2900	7.5	11	15
	D	10.5	10	49.5	1	0.8	1450	1.1	1.5	2.2
TZE40-315	A	42	115	46	2	1.3	2900	37	45	75
	A	21	29	42	2	0.5	1450	5.5	7.5	11
	B	40	107	46	2	1.3	2900	30	45	55
	B	20	26.5	42	2	0.5	1450	5.5	7.5	11
	C	34	81	46	2	1.3	2900	22	30	45
	C	17.5	20	42	2	0.5	1450	4	5.5	7.5
	D	29	61	46	2	1.3	2900	15	22	30
	D	15	15	42	2	0.5	1450	3	3	5.5
TZE50-160	A	50	34	71	2	2.4	2900	11	15	15
	A	25	8.4	69	1	0.8	1450	1.5	2.2	2.2
	B	45	29	71	2	2.4	2900	7.5	11	15
	B	22.5	7	69	1	0.8	1450	1.5	1.5	2.2
	C	38	22	71	2	2.4	2900	5.5	7.5	11
	C	19	5.5	69	1	0.8	1450	1.1	1.1	1.5
	D	31	17	71	2	2.4	2900	3	4	5.5
	D	16.5	4	69	1	0.8	1450	1.1	1.1	1.1
TZE50-200	A	62	52	68	2	2.6	2900	18.5	22	30
	A	31	13	65.5	1	0.7	1450	3	3	4
	B	56	46	68	2	2.6	2900	15	18.5	22
	B	28.5	11.5	65.5	1	0.7	1450	2.2	3	4
	C	49	37	68	2	2.6	2900	11	15	18.5
	C	25	9	65.5	1	0.7	1450	1.5	2.2	3
	D	43	28	68	2	2.6	2900	7.5	11	15
	D	22	7	65.5	1	0.7	1450	1.1	1.5	2.2
TZE50-250	A	70	82	65	2	2.4	2900	30	37	55
	A	35	20	62.5	2	0.7	1450	4	5.5	7.5
	B	66	75	65	2	2.4	2900	30	37	45
	B	33	18.5	62.5	2	0.7	1450	4	5.5	7.5
	C	60	60	65	2	2.4	2900	22	30	37
	C	30	15	62.5	2	0.7	1450	3	4	5.5
	D	50	45	65	2	2.4	2900	15	18.5	22
	D	26	11	62.5	2	0.7	1450	2.2	3	3
TZE50-315	A	87	115	56	3	2.1	2900	55	75	110
	A	44	28	53	2	0.5	1450	11	11	15
	B	80	100	56	3	2.1	2900	45	75	90
	B	40	24	53	2	0.5	1450	7.5	11	15
	C	70	78	56	3	2.1	2900	30	45	55
	C	35	19	53	2	0.5	1450	5.5	7.5	11
	D	57	57	56	3	2.1	2900	22	30	37
	D	30	14	53	2	0.5	1450	3	4	5.5
TZE50-400	A	82	194	48	3	2	2900	110	160
	A	41	48	45	2	0.5	1450	15	22	30
	B	78	175	48	3	2	2900	90	132	160
	B	39	43	45	2	0.5	1450	15	18.5	22
	C	70	140	48	3	2	2900	75	90	132
	C	35	34	45	2	0.5	1450	11	15	18.5
	D	60	102	48	3	2	2900	45	75	90
	D	30	25	45	2	0.5	1450	7.5	11	15
TZE80-160	A	94	32	78	2	3	2900	15	18.5	30
	A	47	8	76	2	0.8	1450	2.2	3	4
	B	85	28	78	2	3	2900	11	15	18.5
	B	42	7	76	2	0.8	1450	2.2	2.2	3
	C	76	23	78	2	3	2900	11	11	15
	C	38	5.5	76	2	0.8	1450	1.5	2.2	2.2
	D	66	17	78	2	3	2900	5.5	7.5	11
	D	34	4	76	2	0.8	1450	1.1	1.1	1.5
TZE80-200	A	103	54	76	1	3.2	2900	30	37
	A	51	13.5	74	4	0.8	1450	4	5.5	7.5
	B	95	48	76	1	3.2	2900	22	30	37
	B	47	12	74	4	0.8	1450	3	4	5.5
	C	84	38	76	1	3.2	2900	15	22	30
	C	41	9.5	74	4	0.8	1450	2.2	3	4
	D	70	30	76	1	3.2	2900	11	15	22
	D	36	7.5	74	4	0.8	1450	1.5	2.2	3
TZE80-250	A	127	82	74	2	3.5	2900	45	75	90
	A	64	20	74	2	1.4	1450	7.5	11	15
	B	120	76	74	2	3.5	2900	45	55	75
	B	60	19	74	2	1.4	1450	7.5	7.5	11
	C	105	59	74	2	3.5	2900	30	45	55
	C	52	14.5	74	2	1.4	1450	4	5.5	7.5
	D	87	45	74	2	3.5	2900	22	30	37
	D	46	11	74	2	1.4	1450	3	4	5.5
TZE80-315	A	141	127	69	2	4	2900	90
	A	70	33	69	2	1	1450	15	18.5	22
	B	135	121	69	2	4	2900	75
	B	66	30	69	2	1	1450	11	15	22
	C	115	97	69	2	4	2900	55	75
	C	56	24	69	2	1	1450	11	11	15
	D	90	74	69	2	4	2900	37	45	75
	D	45	18	69	2	1	1450	5.5	7.5	11
TZE80-400	A	171	187	61	3	3.5	2900	160
	A	85	46	61	2	0.8	1450	22	30	45
	B	159	170	61	3	3.5	2900	160
	B	80	42	61	2	0.8	1450	18.5	30	37
	C	135	130	61	3	3.5	2900	90	132
	C	65	33	61	2	0.8	1450	15	18.5	30
	D	116	95	61	3	3.5	2900	75	90	132
	D	53	25	61	2	0.8	1450	11	15	18.5
TZE100-160	A	162	29	81	2	4.7	2900	22	30	37
	A	81	7.2	81	2	1.4	1450	3	4	5.5
	B	150	24	81	2	4.7	2900	15	22	30
	B	73	6	81	2	1.4	1450	2.2	3	4
	C	130	17	81	2	4.7	2900	11	15	18.5
	C	63	4.3	81	2	1.4	1450	1.5	2.2	3
	D	110	12	81	2	4.7	2900	7.5	11	15
	D	55	3	81	2	1.4	1450	1.1	1.5	2.2
TZE100-200	A	193	50	81	2	3.7	2900	45	55	75
	A	95	12.5	81	2	1	1450	5.5	7.5	11
	B	180	44	81	2	3.7	2900	37	45	75
	B	90	10.5	81	2	1	1450	5.5	7.5	11
	C	155	35	81	2	3.7	2900	30	37	45
	C	80	8.5	81	2	1	1450	4	5.5	7.5
	D	135	26	81	2	3.7	2900	18.5	30	37
	D	70	6	81	2	1	1450	3	3	4
TZE100-250	A	230	79	81	2	4	2900	75	90
	A	115	20	81	2	1	1450	11	15	18.5
	B	218	73	81	2	4	2900	75	90
	B	110	18	81	2	1	1450	11	11	15
	C	190	58	81	2	4	2900	45	75	90
	C	100	14	81	2	1	1450	7.5	11	11
	D	170	44	81	2	4	2900	37	45	75
	D	90	40	81	2	1	1450	5.5	7.5	7.5
TZE100-315	A	250	126	78	2	5	2900	132
	A	125	31	78	2	1.4	1450	18.5	30	37
	B	240	120	78	2	5	2900	132	160
	B	119	29	78	2	1.4	1450	18.5	22	30
	C	203	97	78	2	5	2900	90	132	160
	C	104	24	78	2	1.4	1450	15	18.5	22
	D	170	71	78	2	5	2900	75	75	110
	D	86	17.5	78	2	1.4	1450	11	11	15
TZE100-400	A	300	194	74.5	3	6.4	2900
	A	150	48			1.7	1450	37	45	75
	B	290	180			6.4	2900
	B	145	44			1.7	1450	30	45	55
	C	260	145			6.4	2900
	C	130	36			1.7	1450	22	30	45
	D	224	105			6.4	2900	110	160
	D	115	26			1.7	1450	15	22	30
TZE100-500	A	180	75		3	1.5	1450	75	90	110
	B	167	68					55	75	110
	C	142	53					37	55	75
	D	120	42					30	37	55
TZE150-200	A	320	44	83.5	2	6.4	2900	55	75
	A	160	11	83.5	2	1.7	1450	7.5	11	15
	B	300	39	83.5	2	6.4	2900	45	75	90
	B	152	9.5	83.5	2	1.7	1450	7.5	11	15
	C	265	30	83.5	2	6.4	2900	37	45	75
	C	140	7	83.5	2	1.7	1450	5.5	7.5	11
	D	220	23	83.5	2	6.4	2900	22	30	45
	D	123	5	83.5	2	1.7	1450	3	4	5.5
TZE150-250	A	390	74	82	3	6	2900	110	160
	A	195	18.5	82	2	1.4	1450	15	22	30
	B	355	62	82	3	6	2900	90	110	160
	B	180	6	82	2	1.4	1450	15	18.5	22
	C	325	46	82	3	6	2900	75	90	110
	C	160	11.5	82	2	1.4	1450	11	11	15
TZE150-315	A	442	125	82.5	3	7	2900
	A	220	32.5	81	3	1.7	1450	30	45	55
	B	430	120	82.5	3	7	2900
	B	210	30	81	3	1.7	1450	30	37	55
	C	372	94	82.5	3	7	2900	160
	C	180	24	81	3	1.7	1450	22	30	37
	D	310	68	82.5	3	7	2900	90	132	160
	D	150	17	81	3	1.7	1450	15	18.5	22
TZE150-400	A	520	205	78.5	4	7	2900
	A	260	51	77	3	1.8	1450	55	75	110
	B	498	190	78.5	4	7	2900
	B	250	48	77	3	1.8	1450	55	75	90
	C	453	151	78.5	4	7	2900
	C	225	38	77	3	1.8	1450	37	55	75
	D	400	113	78.5	4	7	2900
	D	200	28	77	3	1.8	1450	30	37	55
TZE150-500	A	300	77	74	3	2	1450	110	132
	B	283	72	74	3	2	1450	90	132	160
	C	233	59	74	3	2	1450	75	90	110
	D	208	45	74	3	2	1450	45	75	75
TZE150-560	A	335	104	74.5	4	2.4	1450	160
	B	315	97	74.5	4	2.4	1450	132
	C	260	80	74.5	4	2.4	1450	90	132	160
	D	216	60	74.5	4	2.4	1450	75	90	110
TZE150-630	A	360	115	63	4	2.4	1450
	B	338	105.5
	C	274	82					132	160
	D	220	60					75	110	160
TZE200-250	A	610	72	84.5	3	9	2900	160
	A	305	17.5	83.5	3	2.4	1450	22	30	45
	B	580	65	84.5	3	9	2900	160
	B	290	16	83.5	3	2.4	1450	18.5	30	37
	C	520	47	84.5	3	9	2900	110	132	160
	C	260	12	83.5	3	2.4	1450	15	18.5	30
	D	470	32	84.5	3	9	2900	75	90	110
	D	240	8	83.5	3	2.4	1450	11	15	15
TZE200-315	A	710	122	85.5	4	8.6	2900
	A	350	30	84.5	3	2	1450	45	55	75
	B	680	114	85.5	4	8.6	2900
	B	340	29	84.5	3	2	1450	37	55	75
	C	600	87	85.5	4	8.6	2900
	C	300	22	84.5	3	2	1450	30	37	55
	D	480	65	85.5	4	8.6	2900	132
	D	250	15	84.5	3	2	1450	18.5	22	30
TZE200-400	A	850	203	82	5	13	2900
	A	426	50	81	3	3.5	1450	90	110	160
	B	830	150	82	5	13	2900
	B	410	47	81	3	3.5	1450	75	110	132
	C	750	145	82	5	13	2900
	C	370	36.5	81	3	3.5	1450	55	75	110
	D	670	106	82	5	13	2900
	D	332	27	81	3	3.5	1450	45	55	75
TZE200-500	A	495	84	81	4	2.9	1450
	B	470	79					160
	C	400	63					110	160
	D	330	48					75	90	132
TZE200-560	A	540	105	79.5	5	3	1450
	B	510	98
	C	460	81					160
	D	350	62					110	132
TZE200-630	A	580	132	77.5	5	3.5	1450
	B	550	125
	C	468	100
	D	372	75					132
TZE250-315	A	545	27	86.5	3	2.9	1450	55	75	110
	B	528	25					55	75	90
	C	480	19					37	55	75
	D	434	13					30	37	45
TZE250-400	A	660	49	87.5	5	3.2	1450	132	160
	B	630	46					110	160
	C	565	36					75	110	160
	D	500	24					55	75	90
TZE250-500	A	800	82	83	5	5	1450
	B	770	76
	C	700	58					160
	D	630	42					110	160
TZE250-560	A	860	106	82	5	4.2	1450
	B	830	98
	C	760	78
	D	665	57					160
TZE250-630	A	855	128	80.5	6	4.2	1450
	B	816	119
	C	720	96
	D	625	71
TZE300-400	A	1050	48	87	4	5.8	1450
	B	1010	45					160
	C	900	34					132	160	160
	D	780	26					90	132
TZE300-500	A	1240	78	88	5	5.8	1450
	B	1170	75
	C	1015	57
	D	870	42					160
TZE300-560	A	1340	104	87	6	5.2	1450
	B	1280	9
	C	1140	77
	D	950	56
TZE300-630	A	1450	132	85	6	5.5	1450
	B	1375	125
	C	1170	100
	D	950	75
TZE400-500	A	1870	74	88	6	6.3	1450
	B	1800	70
	C	1520	52
	D	1300	38
TZE400-560	A	2040	98	88	6	7.5	1450
	B	1950	91
	C	1760	74
	D	1500	54
TZE400-630	A	2390	125	88	7	8.3	1450
	B	2280	117
	C	1960	95
	D	1610	70

II. Product Images:

Unit Price	$3500.00 / Tai
Sales	None
Delivery	AnhuiXuancheng3dayswithin
Stock	10TaiMOQ1Tai
Brand	Galactic Tang Dynasty
Material	Stainless Steel
Manufacturer	Galactic Tang Dynasty
Rated Flow Rate Q	50
Expiry	Long Valid
Update	2023-06-19 09:58

Anhui Xingqi Shengtang Pump Co., Ltd.

THJF Fluorine-lined Centrifugal Pump for Petrochemical Process (API 610 Standard)

安徽星球盛唐泵业有限公司

Merchant Products

Description

You May Like

Latest Info