1. Product Material Properties

PVDF Plastic Ball Ring, DN38mm, with high-temperature resistance up to 150°C, made of PVDF material. The ball ring filling is made of polyvinylidene fluoride (PVDF), with a density of 1.77~1.80g/cm³ and a melting point of 172°C. The heat deflection temperature is 112~145°C, and the operating temperature range is -40~150°C. PVDF is a high-strength, corrosion-resistant material, primarily used in the petrochemical, electronic electrical, and fluorocarbon paint industries. Due to its excellent chemical resistance, workability, and creep resistance, PVDF is one of the materials used for filling in petrochemical equipment, fluid handling systems, pumps, valves, pipes, pipeline fittings, storage tanks, and heat exchangers.

DN38 High-Temperature PVDF Baume Ring Filler - The PVDF plastic Baume ring is resistant to corrosion from oxidizing, alkali chloride, Cl2, wet chlorine, H2SO4, sodium hydroxide, and other corrosive substances. It can be widely used in towers within 167°C to replace ceramic, stainless steel, and other plastic fillers, and does not deform in boiling water. The models of the high-temperature 150-degree fluoroplastic PVDF material Baume ring fillers with DN38mm are: DN16mm Baume ring filler, 25mm Baume ring filler, DN26mm Baume ring filler, DN38mm Baume ring filler, DN50mm Baume ring filler, DN76mm Baume ring filler, DN100mm Baume ring filler, DN150mm Baume ring filler, etc. The Baume ring fillers come in various shapes, including grid pattern, cross pattern, and crosslet pattern.

We can also produce stainless steel Baumeister ring packing, 304 Baumeister ring packing, and 316L Baumeister ring packing. Aluminum, aluminum alloy, and titanium material Baumeister ring packings are available, and we can also customize them to meet specific customer requirements.

2. Structural Features and Advantages

DN38 High-Temperature PVDF鲍尔环 filler has the following advantages in its PVDF plastic structure: Many window holes are opened on the filler ring wall, allowing gases and liquids inside the packed tower to pass through freely through these holes. Particularly, the inner surface of the filler ring is easily wetted by the liquid, making full use of its inner surface. Regardless of the orientation, the liquid sprinkled onto the fillers distributes highly, leading to a high utilization rate of the inner surface of the fillers.

DN38 High-Temperature PVDF Pall Ring Filling, Made from PVDF plastic, the Pall Ring is molded in one piece using PVDF polymer. Available sizes include: Dg16/25/38/50/76/100. Plastic Pall Ring fillings are generally available in three shapes: crisscross, # sign, and cross shape, as well as other special-shaped Pall Rings. The Pall Ring filling is a widely used chemical industry bulk filling material, which has significantly improved the appearance and structure of the Raschig Ring. Two rows of window holes with inwardly projecting tongues are cut into the ring walls, which improves gas-liquid distribution and optimally utilizes the inner surface of the ring. Compared to Raschig Rings, the Pall Ring can increase treatment capacity by over 50% and reduce pressure by half.

DN38 High-Temperature PVDF鲍尔环 Filler, PVDF Plastic鲍尔环 Available in the following plastic materials: Polyethylene (PE), Polypropylene (PP), Reinforced Polypropylene (RPP), Polyvinyl Chloride (PVC), Chlorinated Polyvinyl Chloride (CPVC), High-Performance Polypropylene (PPH), Polyvinylidene Fluoride (PVDF), Polytetrafluoroethylene (PTFE), PFA, and various other plastics. We can also produce various metals such as 304, 316, carbon steel, aluminum, titanium, etc. Special specifications and models can be custom-processed or processed from samples.