Digital High Fidelity Double Waist Pack Wireless System ATW-1311
Equipped with an ATW-RC13 unit, 2 ATW-RU13 receivers, and 2 sets of ATW-1001 box transmitters
Wireless operation with a 24-bit/48 kHz resolution for superior audio quality and reliable performance
2.4 GHz range, free from TV interference
The receiver can be remotely installed outside the body via an Ethernet cable (up to 100 meters away).
Ensure diversity in frequency, time, and space aspects.
Seamless, uninterrupted automatic frequency selection operation
Operation is extremely easy, allowing for instant channel selection, synchronization, and setup.
Advanced and reliable digital receiver performance
Balanced XLR and unbalanced 6.3mm output jacks with level control
The System 10 PRO rack-mountable digital wireless system from the Iron Triangle is designed to deliver reliable performance, with a simple setup and natural, clear sound quality.
The System 10 PRO rackmount system utilizes dual receiver bases and remote installation receiver units, suitable for various handheld and belt-pack configurations. Operating in the 2.4GHz range, it is immune to interference from TV and digital TV signals, offering simple operation and instant channel selection. Up to ten channels can be used simultaneously without any frequency coordination issues.
Each configuration of the System 10 PRO Digital Wireless System includes an ATW-RC13 rack-mountable receiver base that accommodates two receiver units. Depending on the configuration, the system also features two receiver units (ATW-RU13) that can be mounted on the base or remotely, two handheld microphones, or belt-pack transmitters. Some configurations include one or two lavalier microphones connected to the belt-pack transmitters. Up to five bases (10 receiver units) can be connected using the included RJ12 cable, allowing all receivers to be used simultaneously and enhancing the stability of the multi-channel system.
The ATW-RU13 receiver unit can be installed remotely beyond the cabinet via an Ethernet cable (up to 100 meters away) in addition to being mounted on a base, to extend the operational range.
The entire System 10 wireless series offers 24-bit/48kHz digital transmission through three distinct methods: frequency diversity, time diversity, and space diversity, ensuring seamless communication. In terms of frequency diversity, signals are transmitted on two dynamically allocated frequencies for interference-free communication; for time diversity, signals are retransmitted in two time slots, so interference in one set of signals does not affect integrity; and for space diversity, both transmitters and receivers use two antennas simultaneously to ensure greater complementarity.
System 10 Pro Overall System Specifications
| Receiving System | Distributed (Frequency/Time/Spatial) |
| Dimensions | 57.0mm x 19.0mm x 77.6mm (Width x Height x Length) |
| Weight | 64g |
| Remote receiver connection terminal | RJ45 |
| Standard Configuration | Antenna, AT8690 RU13 Mount Bracket |
| Installation | 1/4\" x 20 |
ATW-RC13 Receiver Base
| RF Output Power | 10 mW |
| Scattered emissions | In accordance with federal and national regulations |
| Input Terminal | 4-pin Locking Connector Terminal 1: Ground, Terminal 2: Instrument Input, Terminal 3: Microphone Input, Terminal 4: Power Bias
|
| Battery | 1.5V AA 5-cell alkaline battery x 2 |
| Battery Consumption / Lifespan | 7 hours (depending on battery type) |
| Dimensions | 70.2mm x 107.0mm x 24.9mm (Width x Height x Length) |
| Weight | 100 grams
|
