Product Introduction

Ultrafiltration is a membrane separation technology that utilizes the micropores on the surface of ultrafiltration membranes. It separates solutions through mechanical screening by pushing the fluid across the membrane using pressure differences on either side. The micropores on the ultrafiltration membrane have an aperture size of approximately 0.002 to 0.1 micrometers, corresponding to molecular weights of 1000 to 500,000 daltons. As the raw material liquid flows through the surface of the ultrafiltration membrane under pressure, small molecules like water and inorganic salts, which are smaller than the membrane pore size, pass through the micropores to become the permeate. Meanwhile, larger molecules such as colloids, microorganisms, and suspended particles, which are larger than the membrane pore size, are retained, forming the concentrate.

1.4 Net Tang Hollow Fiber Ultrafiltration Membrane Performance

The physical and chemical properties, as well as the separation characteristics, of hollow fiber ultrafiltration membranes directly determine the feasibility, separation accuracy, and service life of the membrane application.

Physical properties include:

(1) Mechanical Properties: Tensile Strength, Elongation at Break, and Burst Pressure - Key indicators reflecting the film wire's mechanical properties, directly determining the service life of the film wire.

(2) Hydrophobicity: The contact angle of the membrane fiber, an important indicator reflecting the fiber's resistance to contamination. The smaller the contact angle, the better the hydrophilicity and the stronger the ability to resist flux attenuation.

(3) Tolerance: Acid and alkali resistance, temperature resistance, chemical resistance

1.5 Pure Tang Hollow Fiber Ultrafiltration Membrane Application Areas

Potable water purification and treatment, sterile purification water supply system.

Clarification and treatment of groundwater, surface water, and well water.

Replace traditional filtration methods such as sand filters and activated carbon.

Pre-treatment for large reverse osmosis membrane units

Available for removing particulates and suspended matter that ion exchange resin treatment cannot eliminate.

Food & processing water for deodorization, purification.

Reuse of secondary effluent meeting GB8978-1996 standards, reclaimed water from the secondary treatment of domestic wastewater

Used;

General engineering drainage depth treatment.

Oilfield reinjection water purification treatment

Refining of juice beverages and clarification of wines

Extract and refine the turbidity from the extractant.

Residential community or apartment unit water purification system filtration

Pre-treatment for seawater desalination projects.

Ningxia Jingtang Water Treatment, a powerful factory, welcomes visits.

Equipment can be customized according to customer requirements. Contact phone: 16600462097

Note: Product prices are for reference only. Please call for detailed inquiries to obtain a quotation for a customized solution.

Our main products include hollow fiber ultrafiltration membranes, ultrafiltration water purifiers, ultrafiltration equipment, reverse osmosis equipment, seawater desalination equipment, emergency relief equipment, etc. We also offer services such as ultrafiltration system design, installation, and operation maintenance, as well as undertake projects like water purification, reclaimed water reuse, wastewater treatment, brackish water desalination, seawater desalination, and special material concentration and separation.

Hanqing Environmental Technology has further developed a variety of new, energy-saving, and environmentally friendly water treatment products, which are sold in regions including China, Japan, Brazil, Singapore, Vietnam, Malaysia, Indonesia, Myanmar, Pakistan, and the Middle East. These products are applied in industries such as municipal, food and beverage, chemical, steel, electricity, and construction, contributing to local water resource recycling, clean water supply, and waste water standard discharge.

Ultrafiltration System Maintenance Services Include:

To design a reasonable process for the system, ensuring its safe and effective operation; to identify existing issues in the system's operation and provide reasonable solutions, thereby extending the system's operational lifespan.

Ultrafiltration System Cleaning - Maintain Flow Rate

Ultrafiltration membrane component leak detection and repair – enhance water quality output

Product Details