Product Overview
This product is a cutting machine for magnetic materials using diamond wire, which achieves processing and sheet cutting of magnetic materials through a high-speed reciprocating diamond wire wrapped around the main roller and a high-precision control system.
This equipment is primarily used to process magnetic blocks into straight or curved sheets as required, featuring a reliable function, high cutting efficiency, and high processing accuracy, making it a new type of equipment with advanced capabilities.
Cut Samples
Basic Technical Parameters
Serial Number | Project | Unit | Content |
1 | Workbench Workpiece Dimensions | mm | W160*L600*H160 |
2 | Jade wire diameter | mm | 0.10-0.20 |
3 | Lead-in direction | Single/dual directional input line | |
4 | Wire speed | m/min | 2100 |
5 | Cutting Method | Downcut | |
6 | Roller Balance | g | ≤3 |
7 | Cutting Flatness | mm | ±0.01 |
8 | Cutting Thickness | mm | 0.2 |
9 | Cutting Speed | mm/min | 0.2-4 |
10 | Fast forward, fast reverse | mm/min | 10 |
11 | Coil Storage Quantity | m | 50000 |
12 | Number of guide wheels | piece | 6 |
13 | Equipment Dimensions (Length x Width x Height) | mm | Approx. 1400W x 3000L x 2400H |
14 | Preparation Weight | Kg | Approximately 7,500 |
Performance Features
●Workbench Workpiece Dimensions: W160*L600*H160*2
● Diamond wire diameter 0.15-0.45
● Trimming speed up to 1200 m/min
● Cutting method: Cut; upper knife holder side rotation 0-10 degrees
●Cutting thickness 0.2mm
●Prepared Weight: Approx. 5,200 kg; Low Energy Consumption; Main shaft power: 5.5 kW, Total power: Approx. 33 kW; Main shaft power: 7.5 kW, Total power: Approx. 40 kW
●导向轮 minimized to 6 units
● Ready-to-Run Weight: Approximately 5,200 kg
● Cut Continuation Function
● The cutting line features a swing function
