Product Overview
This product is a cutting machine for magnetic materials using diamond wire, which achieves processing and slicing of magnetic materials through a diamond wire wrapped around the main roller and operating at high speed in a reciprocating motion, complemented by a high-precision control system.
This equipment is primarily used to process solid magnetic materials into straight or curved sheets as required. It is a new type of device known for its reliable performance, high cutting efficiency, and precise processing.
Cutting Sample
Basic Technical Parameters
Serial Number | Project | Unit | Content |
1 | Workbench Workpiece Dimensions | mm | W160*L600*H160 |
2 | Diamond wire diameter | mm | 0.10-0.20 |
3 | Infeed direction | Single/dual-sided incoming line | |
4 | Line speed | m/min | 2100 |
5 | Cutting Method | Downcut | |
6 | Roller Balance | g | ≤3 |
7 | Cutting Plane Flatness | mm | ±0.01 |
8 | Cutting Thickness | mm | 0.2 |
9 | Cutting Speed | mm/min | 0.2-4 |
10 | Fast forward, fast reverse | mm/min | 10 |
11 | Spool winding storage capacity | m | 50000 |
12 | Number of guide wheels | piece | 6 |
13 | Equipment Dimensions (Length x Width x Height) | mm | Approx. W1400*L3000*H2400 |
14 | Preparation Mass | Kg | Approximately 7,500 |
Performance Features
●Workbench Workpiece Dimensions: W160*L620*H160
●金刚线 wire diameter 0.15-0.45
● Seam speed up to 1500 m/min
● Cutting method: Knife holder rotates 0-10 degrees on one side, worktable moves horizontally 0-50.
●Cutting thickness: 0.2mm
●Low Energy Consumption - Main shaft power: 5.5 Kw, Total power approx. 39 Kw; Main shaft power: 7.5 Kw, Total power approx. 46 Kw
● Guiding wheels reduced to 6
●Ready-for-shipment weight: Approximately 5,200 kg
● Break and Continue Cutting Function
● The cutting line features a swivel function
