
1100KW Cummins Generator Set Technical Specifications | |
Product Description | |
Cummins on-highway diesel generator sets are designed, manufactured, and tested to Cummins' global standards, providing customers with a reliable, integrated power generation system that delivers exceptional performance in constant, standby, and continuous operation modes. ➊ MeetsISO 8528-2005 and GB/T 2820-2009 Standard for "AC Generator Sets Driven by Reciprocating Internal Combustion Engines" ➋ Design and manufacturing of the generators have both been certified.ISO 9001 or ISO 9002 Certification. ➌ Cummins offers1-year or 1,000-hour runtime warranty, covering full warranty for the generator set, including the engine, generator, and control system. ➍ A nationwide professional service network serving customers24/7 after-sales service and technical support. | |
Performance Features | |
■ Lubrication System: All moving parts are lubricated under pressure; gear pumps supply pressurized lubricant to lubricate and cool the piston bearings. | |
Environmental Requirements | |
Altitude(m):≤1000 Fuel Standards:0# Diesel Fuel Atmospheric Pressure(kPa):≥89.9 Engine Oil Standards:CF/15W-40 Inlet Temperature(℃):≤40 | Water QualitypH: 6.5-8 Relative Humidity:≤60% Mold Growth Level on Surface: ≤GB/T2423.16/Grade 2 Seismic Resistance: Horizontal Acceleration0.2g vertical acceleration, 0.1g |
Generator Set Specifications | |
Model: Open Rack Engine Model:C1100GF Standby Power(KW):1200 Common Power(KW):1100 Engineered dimensions(mm):5500x2100x2500 Engineered weight(kg):11000 RPM(r/min):1500 Fuel Consumptiong/kw.h):205 Frequency(HZ):50 | Transient Voltage Regulation Ratio:≤-15%/+20% Steady-state voltage regulation ratio:≤±1% Voltage Stability Time:≤3sec Voltage fluctuation rate:≤0.5% Voltage waveform distortion:≤8% Steady-state frequency adjustment rate:≤5% Transient Frequency Adjustment Rate≤-10%/+12% Frequency Stability Time:3sec Frequency Volatility:≤1.5% |
Engine specifications | |
Diesel Engine Brands:Cummins/ Cummins Manufacturer:Chongqing Cummins Engine Co., Ltd. (CCEC) Diesel Engine Model:KTA50-G8 Standby Power(KW):1429 Output Power(KW):1200 Number of cylindersArrangement: 16 cylinders/V-type Compression Ratio:13.9:1 Bore diameter* Travel (mm): 159*159 DisplacementL):50.3 Oil Pressurepsi):50~70 Oil Temperature℃):≤121 | Oil Capacity(L):204 Cooling Water Capacity(L):477 Fuel SystemPT Pump Direct Injection Cooling Method: Closed-loop Water Cooling Startup Method:DC24V Electric Start Speed Control Method: Electronic Speed Control Inlet Method: Turbocharged, Intercooler Type: Four-stroke60° Constant Load Steady-State Variability±0.25% Power Deviation:≦±5% |
Generator specifications | |
Generator Brand:Stamford/Stanford Manufacturer: Cummins Generator Technologies (China) Co., Ltd. Power Generation TypeItem No.S6L1D-H41 Rated Capacity:1100KW Voltage:400V/230V Form: Brushless, Single-Bearing, Rotating Magnetic Field Excitation System: Self-excitation, Automatic Voltage Regulation Winding structure:2/3 pitch Three-phase four-wire | Insulation Grade:H Grade Power Factor:COSΦ = 0.8 lag Telephone Interference Coefficient:TIF:<50 Wiring:Y connection Telephone Harmonic Coefficient:THF:<2% Protection Level:IP23 Radio Frequency Interference: CompliantBS800 and VDE Class G, N Comply with Standards:GB 755, BS 5000 Part 3, VDE 0530, NEMA MG1-22, IEC-34, GSA C22-100, AS 1359 |
Standard Configuration | |
Engine Parts: Engine, Diesel Filter, Air Filter, Oil Filter, Charger, Starter Motor. Generator section: Generators, circuit breakers. Control System:LCD liquid crystal display controller, electronic speed controller. Other Parts: Water Tank Radiator, Steel Base, Vibration Dampers. Appendix: Mufflers, Batteries, Battery Wires, Engine Oil, Vibration Pads. | |
Compliance Standards | |
Military Standard GJB 5785-2006 National Standards GB/T 2820-2002 Communication Standards YD/T 502-2007 | Industry Standards JB/T 10303-2001 Environmental CertificationNoise and Vibration Class A / Exhaust Class A Tael Quality Certification YD/T502-2007* |































