JS- 8005B Oxidizing Disinfectant
◆ Features
This product is non-toxic, non-irritating, non-mutagenic, and non-teratogenic. Compared to oxygen, it has the following advantages::
●1. Kills general microorganisms, plus fungicidal and bactericidal properties
●2. Does not react with ammonia, fermentation, and unsaturated compounds. Therefore, it is particularly suitable as a biocide in the circulating water of fertilizer factories.
●3. Non-volatile
● 4. The pH change has a minimal effect on the sterilization effect, thus it is suitable as a biocide during reducing operation.
● 5. Fully replaceable for chlorine and non-oxidizing biocides
● 6. Easy and Safe Addition
Application
This product is a strong oxidizing agent. Due to its high efficiency, non-toxicity, and non-irritating properties, it is a new generation of safe and multifunctional sterilization and disinfection agent. It can be widely used in drinking water, circulating cooling water, environmental disinfection, food preservation, odor removal, and equipment sterilization.
How to Use
This product can replace chlorine gas as a bactericide and algicide in circulating cooling water. Each2 to 3 days: Add 30 to 50 mg/L before use, treating with an activator for 5 to 10 minutes. Then, add to the suction inlet of the recirculation pump for slime stripping, dosage can be 100 to 200 mg/L. JS-8005B should be used up on the same day after activation.
Packaging & Storage
This product is packaged in dark plastic drums, with each drum weighing net25kg. Store in a cool, well-ventilated indoor area, away from direct sunlight. Shelf life: 10 months. Each drum of stabilized chlorine dioxide comes with one bottle of activator.
◆Technical Requirements
Project | Technical Specifications |
Appearance | Colorless or slightly yellowish transparent liquid |
Active Ingredient Content% | ≥2.0 |
pH value | ≥8.0 |
Density(20℃)g/m³ | ≥1.02
|





























