Heating antifreeze fluid
Our product features long-lasting anti-freezing, heat conduction, corrosion resistance, scale prevention, high boiling point, non-flammable, and non-explosive properties. Compared to traditional boilers using water as the medium under the same conditions: it saves energy by over 20%, and intermittent heating can save up to 40%. It heats up quickly (reaching 100℃ in less than 8% less time than water), cools down slower, and maintains heat longer than water (retaining heat for one to two hours longer after being turned off), with a lower evaporation rate than water.
Add this product to the heating system just like you would add water. During use, the system will evaporate normally, and you can simply replenish water without the need for additional antifreeze. If there's water leakage, overflow, dripping, or seeping, you should replenish with the same quality of heating antifreeze.
For old heating systems, first, drain all the water from the system and then flush it clean before adding this product. If the original heating system can be treated with a chemical cleaning agent before adding this product, the effect will be even better. For caution, it is advisable not to use this product on old and severely corroded water heating systems that have been in use for many years, as the rubber gaskets at the joints of old water heating systems have aged and are prone to leakage. If the old water heating system still has value, replace the rubber gaskets with PTFE silicone pads (white transparent pads) and anaerobic sealing rings (thread locking adhesive) before using this product.
If the concentration of this product needs to be reduced, it must be supplemented with a heating system anti-corrosion agent (for typeless heat pump heating systems), otherwise, the anti-freezing properties and the product's corrosion and anti-corrosion properties will be reduced.
"Golden Prajna" antifreeze heating fluid should not be mixed with other brand antifreeze.