●Product Introduction
· 0-degree body silicone is a two-component addition curing silicone material that can cure at room temperature or be heated to cure.
Product Features
· The product can be used over a long period at temperatures ranging from -65℃ to 200℃ while maintaining its soft and elastic properties.
· Non-toxic and eco-friendly, certified by food-grade environmental standards.
·Excellent electrical and chemical stability, water-resistant, ozone-resistant, weather-resistant, non-corrosive, biologically inert, odorless and tasteless, low shrinkage, easy to handle, and more.
●Application
Primarily used for making human dolls, soft-touch products like human skin, adult products, breast stickers, shoulder pads, and buttock pads that do not oil or stick.
Usage Instructions and Precautions
Mix A and B components in a 1:1 ratio by weight and blend evenly. After vacuum degassing, the mixture is ready for pouring. Operating time at room temperature (28°C) is 30 minutes, with complete curing in 2-3 hours; heating to 60-120°C allows for complete curing in a few minutes.
· Keep separate from containers that have been used with condensation silicone, and use unused room temperature silicone tools to handle this silicone.
Technical Specifications
Physical Properties Before Mixing25℃，65％RH）
| ||
Group Component
| F-J000 A
| F-J000 B
|
Color
| Semi-transparent
| Semi-transparent
|
Viscosity (cP)
| 1700±300
| 600±300
|
Specific Gravity
| 1.12
| 1.11
|
Mixed Property25℃，65％RH）
| ||
Mixture Ratio (Weight Ratio)
| A：B = 1：1
| |
Color
| Semi-transparent
| |
Mixed Viscosity (CP)
| 1100±300
| |
Operation Time at 25℃ (min)
| 30±10
| |
Initial Setting Time (h)
| 3-4
| |
Hardness (Shore A)
| 0±2A
| |
Tensile Strength (MPa)
| ≥2
| |
Tear Strength (kgf/cm)
| ≥6
| |
Tensile elongation at break (%)
| ≥530
| |
*Viscosity, operating time, and hardness after curing can be adjusted according to customer requirements.
● Packaging Specifications
· Packaging Specifications: A: 25kg, B: 25kg
Custom packaging available
● Storage and Transportation
· Shelf Life: 12 months (should be stored at room temperature, dry and in a sealed container, do not come into contact with water to prevent spoilage)
· These products are non-hazardous and can be transported as general chemicals.
Note:This silicone should not come into contact with any other condensable silicone, as it can cause hardener poisoning, resulting in the silicone not solidifying. Water, impurities, organotin catalysts, acids, bases, and other sulfur, phosphorus, and nitrogen-containing organic substances can affect the curing of the adhesive. These substances must not be mixed in or come into contact with the adhesive during use.
